Electric Heaters
Fan Heater
Baseboard Heaters
Industrial / Commercial Heater
Kickspace Heater
Heat Pump System
Stay warm and cool throughout the year with a Heat Pump AC System from HomElectrical
The top five reasons are:
Cheaper to buy - In general, they are cheaper to buy than other heating options.
Easier To Install - Unlike gas heating, there is no need for complicated ductwork and venting. You can simply plug them into an outlet. However, some more permanent version needs to be wired to a line voltage. Although you could do-it-yourself, we recommend that you contact a certified electrician for the job.
Low Maintenance - They are quite simple. Either they work or don't. There are not that many moving parts to troubleshoot. Since there are no ducts or venting involved, you don’t need to have an annual maintenance program to ensure proper CO venting is in place. Overall, it is safer to work with electricity than natural gas which is a combustible gas.
100% Energy Efficient - As a heater, 100% of the energy from the electricity it used is converted into heat. 100% of that heat is then blown into the room directly to warm up the cold air. The main disadvantage of a central gas heater, a lot of the heat is lost in the ductwork between your furnace and the room it is heating.
Last longer - With proper maintenance, electric heaters will last you 20 to 30 years. While a gas heater has a lifespan of between 10 and 20 years.
The best type is the one that suits you the most. Here is a quick overview of the common type of heaters you should consider:
Baseboard Heater – It is often found at the base of the wall. It uses convection technology to circulate warm air around the room. It is often the cheapest option, but one of the more expensive units to operate. It comes in 2-ft to 10-ft long.
Cove Heaters – It uses radiant technology to emit radiation energy to warm you up. It is designed to provide warmth around the unit and not heat the surrounding air.
Space Heater – AKA Ceramic Heater. These are ideal for adding incremental heat in small areas. It does not require a certified electrician to wire it to the line voltage. Quartz heaters are often used as personal portable heaters.
Mini Split System – It’s a ductless heating system that requires an outdoor condenser and an air handler for each room. The main benefit is that it does not require complicated ductwork throughout the house.
Wall Heater – It’s used for supplemental heat and is often found in bathrooms. It’s a self-contained unit with a built-in adjustable thermostat. It is recommended to consult with a certified electrician for proper wiring.
Floor Heating – It uses radiant technology through a system of wires or pipes that run beneath the flooring. This is a great solution to ensure that you will never have to walk on cold ceramic tile flooring anymore.
Kickspace Heater – Also referred to as Toe-kick Heaters. They are designed to be installed in small space and are typically found closer to the ground under a cabinet or vanity.
Electric Fireplace – Also known as Stove Heater. It gives you the look and feel of a fireplace without the danger of an open flame. They are perfect for an apartment or where gas is not an option.
A remote control is available as an option in most units.
Radiant heaters use infrared radiation to heat the surrounding area. It basically works like the sun. The closer you get to it, the hotter it is. Once you step away from the source, you no longer feel the heat. Convection heaters use electric currents to warm up the surrounding medium such as air or liquid.
The forced-air heater, or fan heater, consists of a heating element and a fan. The electric energy is converted into heat energy through the coils. The fan moves cool air from the room through the heating coil, and warm air is blown back into the room. This is the quickest way to move warm air through a space.
Immersion and Hydronic heaters use hot liquid to warm the surrounding air. A series of liquid-filled tubing radiates heat along your baseboard or floor heating. Most hydronic system use hot water as the liquid, but oil is also an alternative source in some mini splits. The principle is to heat the room from the floor up. Since you are closer to the floor, it is considered the most effective and efficient way to provide warmth.
The amount of heat you will need depends on the size of your room and where you live. People in Southern California will not need as much heat to warm the same amount of space as the ones living in New York.
Most Electric Heaters are sold in Wattage which is how much power the unit consumes and not how much heat it is producing.
Fun fact: Heat is measured in BTU (British Thermal Unit.) 1 BTU is the energy needed to heat or cool one pound of water by 1 degree Fahrenheit.
On average, you can use 10 watts per square foot (sf) as your constant to calculate the proper wattage needed for your room.
For example:
If your room is 10-ft X 15-ft, then you will need 10-ft X 15-ft X 10-W/sf = 1500 watts.
Fun fact: If you have a high ceiling, you don’t need to add more wattage. Use a ceiling fan to move the warm air back down. With proper air circulating, you will be able to properly heat your room more efficiently.
If your room has lots of windows or you live in a colder area (i.e. Boston,) then go up to the next heater. While if you live in a warmer region (i.e. Florida,) go down one level.
Keep in mind that because a 5000-Watt heater is the same price as a 1600-Watt version, does not mean that you are getting a better deal.
Having the correct heat settings for the size of your room ensures proper operation. Most modern heaters have overheat protection built-in which automatically shuts the heater off in the event it is too hot. Over-sized heaters will constantly shut off and will eventually quit working.
Under-sized heaters will constantly run while your room remains cold. The unit will eventually burn out and stop working.