Eaton Wiring 600W Dimmer Sensor, Vacancy, 1000 sq ft. Range, Gray
Eaton Wiring VS106D1-GY
SKU ETW-VS106D1GY
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Image may not depict product actual color, inclusions or accessories
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Eaton Wiring 600W Dimmer Sensor, Vacancy, 1000 sq ft. Range, Grey features:
- Has Soft ON/ Fade OFF.
- Preset & light level change is easily shown with horizontal row of green LEDs.
- Works will popular load types: Halogen, Incandescent, & Magnetic Low-Voltage.
- Single green LED indicates load status, provides locator light in the dark, & blinks to indicate motion detention.
- Push pad design provides minimal travel & crisp actuation.
- Provides 180 degree field of view & 1000 sq. ft. of major motion coverage.
- Selectable time delay of 5 seconds, 5 minutes, 15 minutes, & 30 minutes for lights to remain on after room is vacated.
- Reverse mode allows light to stay off in a room when motion is detected.
- Occupancy sensors time delay default set to 30 minutes.
- Occupancy sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Allows to toggle between Auto-ON/Auto-OFF or Manual ON/Auto-OFF mode with a simple press & hold off a switch.
- Provides for a bypass feature to allow the sensor to perform as a traditional switch.
- Electrostatic discharge protection.
- Neutral required for device installation.
Similar Dimmer Switches Products
Eaton Wiring VS106D1-GY Description
Eaton Wiring 600W Dimmer Sensor, Vacancy, 1000 sq ft. Range, Grey features:
- Has Soft ON/ Fade OFF.
- Preset & light level change is easily shown with horizontal row of green LEDs.
- Works will popular load types: Halogen, Incandescent, & Magnetic Low-Voltage.
- Single green LED indicates load status, provides locator light in the dark, & blinks to indicate motion detention.
- Push pad design provides minimal travel & crisp actuation.
- Provides 180 degree field of view & 1000 sq. ft. of major motion coverage.
- Selectable time delay of 5 seconds, 5 minutes, 15 minutes, & 30 minutes for lights to remain on after room is vacated.
- Reverse mode allows light to stay off in a room when motion is detected.
- Occupancy sensors time delay default set to 30 minutes.
- Occupancy sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Allows to toggle between Auto-ON/Auto-OFF or Manual ON/Auto-OFF mode with a simple press & hold off a switch.
- Provides for a bypass feature to allow the sensor to perform as a traditional switch.
- Electrostatic discharge protection.
- Neutral required for device installation.
Similar Dimmer Switches Products
This page is for your reference only.
Shop for similar Dimmer Switches
Product Specifications
| Part Number | VS106D1-GY |
| Certificate | cUL/UL Listed |
| Color / Finish | Gray |
| Control Style | Single Pole |
| Material | Polycarbonate |
| Maximum Voltage | 120V |
| Wattage | 600W |
| Product Dimensions | 3.31-in X 2.84-in X 5.40-in |
| Weight | 50.00-lb |
| UPC | 032664710704 |
Manufacturer Description
Vac SW,Dim,SP,600W,INC,NLight,GY
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
This page is for your reference only.
Shop for similar Dimmer Switches
Similar Dimmer Switches Products
Eaton Wiring VS106D1-GY Description
Eaton Wiring 600W Dimmer Sensor, Vacancy, 1000 sq ft. Range, Grey features:
- Has Soft ON/ Fade OFF.
- Preset & light level change is easily shown with horizontal row of green LEDs.
- Works will popular load types: Halogen, Incandescent, & Magnetic Low-Voltage.
- Single green LED indicates load status, provides locator light in the dark, & blinks to indicate motion detention.
- Push pad design provides minimal travel & crisp actuation.
- Provides 180 degree field of view & 1000 sq. ft. of major motion coverage.
- Selectable time delay of 5 seconds, 5 minutes, 15 minutes, & 30 minutes for lights to remain on after room is vacated.
- Reverse mode allows light to stay off in a room when motion is detected.
- Occupancy sensors time delay default set to 30 minutes.
- Occupancy sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Allows to toggle between Auto-ON/Auto-OFF or Manual ON/Auto-OFF mode with a simple press & hold off a switch.
- Provides for a bypass feature to allow the sensor to perform as a traditional switch.
- Electrostatic discharge protection.
- Neutral required for device installation.
Product Specifications
| Part Number | VS106D1-GY |
| Certificate | cUL/UL Listed |
| Color / Finish | Gray |
| Control Style | Single Pole |
| Material | Polycarbonate |
| Maximum Voltage | 120V |
| Wattage | 600W |
| Product Dimensions | 3.31-in X 2.84-in X 5.40-in |
| Weight | 50.00-lb |
| UPC | 032664710704 |
Manufacturer Description
Vac SW,Dim,SP,600W,INC,NLight,GY
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?