LEDVANCE Sylvania 8-ft 42W LED T8 Tube, Direct-Wire, FA8, 5040 lm, 120V-277V, 5000K
LEDVANCE Sylvania LED42T8HOL96-2FGPDIM850BF
SKU SYL-41875
Sylvania's 8-ft 42W LED T8 Tube, Direct-Wire, Dimmable, 82 CRI, 120-277V, 5000K is an alternative to fluorecent lights, featuring two pieces that connect making easier and more cost effcient logistics. Shop HomElectrical today for our Sylvania products!
Image may not depict product actual color, inclusions or accessories
Sylvania's 8-ft 42W LED T8 Tube, Direct-Wire, Dimmable, 82 CRI, 120-277V, 5000K is an alternative to fluorecent lights, featuring two pieces that connect making easier and more cost effcient logistics. Shop HomElectrical today for our Sylvania products!
- Industry changing two-piece snap-fit design that is available in two wattages: 36W and 42W.
- Frosted glass optics with shatter-resistant PET coating.
- 36W available in FA8, Single-Pin base.
- Base Flexibility: 42W Lamps ship with FA8 base (single pin) but kit includes R17D (recessed double-contact) base to allow for retrofit into T8 or T12 Slimline (FA8) or T8HO applications (R17D).
- Kit includes bracket and screw for support in the middle of the lamps.
- Double-ended wiring configuration.
- CCT: 3000K, 3500K, 4100K, 5000K.
- Beam angle: 200 degrees.
- Safety circuit prevents current from flowing through the lamp when only one end is engaged in the socket thereby eliminating potential shock hazard.
- No risk of electrical arcing between the lamp pins and the lamp holders.
- Suitable for dry and damp locations (cannot come in direct contact with water).
- Suitable for open and enclosed fixtures.
- These lamps have been tested and approved with some 0-10V dimmer.
- No warm-up time, instant-on with full light output and stable lamp-to-lamp color.
- Input voltage range: 120V/277V.
- Input voltage tolerance: 10 percentage (108V-305V).
- Power Factor greater than 0.9.
- THD less than 25 percentage.
- 50,000 hours (L70).
- 5 Yr.limited lamp warranty (24/7 operation).
- NLB Trusted Warranty Program.
- -4 degrees F to over 113 degrees F (-20 degrees C to over 45 degrees C).
- Certifications: RoHS Compliant, FCC, NSF, DLC Listed.
Similar T8 / T12 LED Tube Products
LEDVANCE Sylvania LED42T8HOL96-2FGPDIM850BF Description
- Industry changing two-piece snap-fit design that is available in two wattages: 36W and 42W.
- Frosted glass optics with shatter-resistant PET coating.
- 36W available in FA8, Single-Pin base.
- Base Flexibility: 42W Lamps ship with FA8 base (single pin) but kit includes R17D (recessed double-contact) base to allow for retrofit into T8 or T12 Slimline (FA8) or T8HO applications (R17D).
- Kit includes bracket and screw for support in the middle of the lamps.
- Double-ended wiring configuration.
- CCT: 3000K, 3500K, 4100K, 5000K.
- Beam angle: 200 degrees.
- Safety circuit prevents current from flowing through the lamp when only one end is engaged in the socket thereby eliminating potential shock hazard.
- No risk of electrical arcing between the lamp pins and the lamp holders.
- Suitable for dry and damp locations (cannot come in direct contact with water).
- Suitable for open and enclosed fixtures.
- These lamps have been tested and approved with some 0-10V dimmer.
- No warm-up time, instant-on with full light output and stable lamp-to-lamp color.
- Input voltage range: 120V/277V.
- Input voltage tolerance: 10 percentage (108V-305V).
- Power Factor greater than 0.9.
- THD less than 25 percentage.
- 50,000 hours (L70).
- 5 Yr.limited lamp warranty (24/7 operation).
- NLB Trusted Warranty Program.
- -4 degrees F to over 113 degrees F (-20 degrees C to over 45 degrees C).
- Certifications: RoHS Compliant, FCC, NSF, DLC Listed.
Similar T8 / T12 LED Tube Products
$28.85Each
Sold by the Case of 10 for only $288.50
Ships between 03/06/2026 - 03/12/2026
Return180-day Return Policy
Product Specifications
| Part Number | LED42T8HOL96-2FGPDIM850BF, 41875 |
| Beam Angle | 200 |
| Color / Finish | Frosted |
| Color Temperature | 5000K |
| CRI | 82 |
| Lamp Type/Light Source | LED |
| Life Hours | 50000 |
| Lumens | 5040 lm |
| Maximum Voltage | 277V |
| Tube Length | 8 ft |
| Warranty | 5 Yr |
| Wattage | 42W |
| Product Dimensions | 93.88-in X 1-in X 1-in |
| Diameter | 1-in |
| Weight | 9.61-lb |
| UPC | 046135418754 |
Manufacturer Description
8ft LEDlescent Direct Wire Ballast-Free Type B LED T8, Glass with frosted shatter-resistant PET coating, 42W,120-277V, 80 CRI, 5000 Lumens, 5000K, 50000 Hrs life. 2-pc Snap-Fit design. Changeable single pin and RDC base, dimmable
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Sylvania's 8-ft 42W LED T8 Tube, Direct-Wire, Dimmable, 82 CRI, 120-277V, 5000K is an alternative to fluorecent lights, featuring two pieces that connect making easier and more cost effcient logistics. Shop HomElectrical today for our Sylvania products!
$28.85Each
Sold by the Case of 10 for only $288.50
Ships between 03/06/2026 - 03/12/2026
Return180-day Return Policy
Similar T8 / T12 LED Tube Products
LEDVANCE Sylvania LED42T8HOL96-2FGPDIM850BF Description
- Industry changing two-piece snap-fit design that is available in two wattages: 36W and 42W.
- Frosted glass optics with shatter-resistant PET coating.
- 36W available in FA8, Single-Pin base.
- Base Flexibility: 42W Lamps ship with FA8 base (single pin) but kit includes R17D (recessed double-contact) base to allow for retrofit into T8 or T12 Slimline (FA8) or T8HO applications (R17D).
- Kit includes bracket and screw for support in the middle of the lamps.
- Double-ended wiring configuration.
- CCT: 3000K, 3500K, 4100K, 5000K.
- Beam angle: 200 degrees.
- Safety circuit prevents current from flowing through the lamp when only one end is engaged in the socket thereby eliminating potential shock hazard.
- No risk of electrical arcing between the lamp pins and the lamp holders.
- Suitable for dry and damp locations (cannot come in direct contact with water).
- Suitable for open and enclosed fixtures.
- These lamps have been tested and approved with some 0-10V dimmer.
- No warm-up time, instant-on with full light output and stable lamp-to-lamp color.
- Input voltage range: 120V/277V.
- Input voltage tolerance: 10 percentage (108V-305V).
- Power Factor greater than 0.9.
- THD less than 25 percentage.
- 50,000 hours (L70).
- 5 Yr.limited lamp warranty (24/7 operation).
- NLB Trusted Warranty Program.
- -4 degrees F to over 113 degrees F (-20 degrees C to over 45 degrees C).
- Certifications: RoHS Compliant, FCC, NSF, DLC Listed.
Product Specifications
| Part Number | LED42T8HOL96-2FGPDIM850BF, 41875 |
| Beam Angle | 200 |
| Color / Finish | Frosted |
| Color Temperature | 5000K |
| CRI | 82 |
| Lamp Type/Light Source | LED |
| Life Hours | 50000 |
| Lumens | 5040 lm |
| Maximum Voltage | 277V |
| Tube Length | 8 ft |
| Warranty | 5 Yr |
| Wattage | 42W |
| Product Dimensions | 93.88-in X 1-in X 1-in |
| Diameter | 1-in |
| Weight | 9.61-lb |
| UPC | 046135418754 |
Manufacturer Description
8ft LEDlescent Direct Wire Ballast-Free Type B LED T8, Glass with frosted shatter-resistant PET coating, 42W,120-277V, 80 CRI, 5000 Lumens, 5000K, 50000 Hrs life. 2-pc Snap-Fit design. Changeable single pin and RDC base, dimmable
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?