GP Standard 2-Head Emergency Light, White
GP GMTR-1
SKU GP-GMTR1
Image may not depict product actual color, inclusions or accessories
- 120V/277V dual voltage.
- "On' LED indicator light and push-to-test switch for code compliance testing.
- 3.6V, maintenance-free, rechargeable, long-lasting, NiCd battery.
- Fully automatic, two rate charger starts recharging a discharged battery in 24 hours time.
- Remote capacity option available.
- UL Listed for damp locations.
- 1 watt (8 LEDs x.125W) per head.
- High performance chrome-plated metallized reflector and plastic lens for optimal light distribution.
- Mountable for wall or ceilings.
- Optimal light distribution using plastic lens and high-performance chrome-plated metallized reflector.
- Adjustable LED heads for customizable lighting.
- Injection-molded, 5VA flame retardant, engineering grade, impact resistant, thermoplastic white finish.
- Top and side knockout for conduit applications.
- Surface mount using quick-connect back plate technology, fitting most standard size junction boxes.
- Snaps into place in order to create internal electrical connections.
Similar Emergency Light Products
GP GMTR-1 Description
- 120V/277V dual voltage.
- "On' LED indicator light and push-to-test switch for code compliance testing.
- 3.6V, maintenance-free, rechargeable, long-lasting, NiCd battery.
- Fully automatic, two rate charger starts recharging a discharged battery in 24 hours time.
- Remote capacity option available.
- UL Listed for damp locations.
- 1 watt (8 LEDs x.125W) per head.
- High performance chrome-plated metallized reflector and plastic lens for optimal light distribution.
- Mountable for wall or ceilings.
- Optimal light distribution using plastic lens and high-performance chrome-plated metallized reflector.
- Adjustable LED heads for customizable lighting.
- Injection-molded, 5VA flame retardant, engineering grade, impact resistant, thermoplastic white finish.
- Top and side knockout for conduit applications.
- Surface mount using quick-connect back plate technology, fitting most standard size junction boxes.
- Snaps into place in order to create internal electrical connections.
Similar Emergency Light Products
This page is for your reference only.
Shop for similar Emergency Light
Product Specifications
| Part Number | GMTR-1, 02-EAW-LED |
| Application Type | Emergency Light |
| Lumens | 90 lm |
| Weight | 1.60-lb |
Manufacturer Description
Electrical:
- Dual Voltage input 120/277V, 60Hz
- Line-latching
- Brownout circuit
- Low voltage disconnect
- Overload / short circuit protection
- Test switch power connector facilitates installation
Housing:
- All components are injection molded, color stable, high impact thermoplastic material
- Designer textured finish standard
- Components are snap-fit construction to facilitate an under 5 min. installation.
- Reinforcing ribs throughout to provide maximum strength
- Suitable for wall or ceiling mounting
- Universal J-box mounting pattern
- Keyhole mounting slots
Battery:
- Sealed lead Calcium, recombination, maintenance-free, long-life
- Full recharge time of 24hrs (Max.)
- Polarized batter terminals
Head / Lamp Data:
- Two Heads standard
- Square head type design
- Glare-free lens
- Fully adjustable lamp housing
- High impact thermoplastic
- Matches housing finish
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This page is for your reference only.
Shop for similar Emergency Light
Similar Emergency Light Products
GP GMTR-1 Description
- 120V/277V dual voltage.
- "On' LED indicator light and push-to-test switch for code compliance testing.
- 3.6V, maintenance-free, rechargeable, long-lasting, NiCd battery.
- Fully automatic, two rate charger starts recharging a discharged battery in 24 hours time.
- Remote capacity option available.
- UL Listed for damp locations.
- 1 watt (8 LEDs x.125W) per head.
- High performance chrome-plated metallized reflector and plastic lens for optimal light distribution.
- Mountable for wall or ceilings.
- Optimal light distribution using plastic lens and high-performance chrome-plated metallized reflector.
- Adjustable LED heads for customizable lighting.
- Injection-molded, 5VA flame retardant, engineering grade, impact resistant, thermoplastic white finish.
- Top and side knockout for conduit applications.
- Surface mount using quick-connect back plate technology, fitting most standard size junction boxes.
- Snaps into place in order to create internal electrical connections.
Product Specifications
| Part Number | GMTR-1, 02-EAW-LED |
| Application Type | Emergency Light |
| Lumens | 90 lm |
| Weight | 1.60-lb |
Manufacturer Description
Electrical:
- Dual Voltage input 120/277V, 60Hz
- Line-latching
- Brownout circuit
- Low voltage disconnect
- Overload / short circuit protection
- Test switch power connector facilitates installation
Housing:
- All components are injection molded, color stable, high impact thermoplastic material
- Designer textured finish standard
- Components are snap-fit construction to facilitate an under 5 min. installation.
- Reinforcing ribs throughout to provide maximum strength
- Suitable for wall or ceiling mounting
- Universal J-box mounting pattern
- Keyhole mounting slots
Battery:
- Sealed lead Calcium, recombination, maintenance-free, long-life
- Full recharge time of 24hrs (Max.)
- Polarized batter terminals
Head / Lamp Data:
- Two Heads standard
- Square head type design
- Glare-free lens
- Fully adjustable lamp housing
- High impact thermoplastic
- Matches housing finish
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?