MaxLite 44W 4 Ft Dual LED Lamp Ready Vapor Tight Linear Fixture w/ Motion Sensor
MaxLite LSV2XT8USE4806MSO
SKU MXL-LSV2XT8USE4806MSO
Upgrading to LED utility lighting with lamp ready vapor tight fixtures allows direct replacement of LED tubes into the pre-wired fixture without needing to hire an electrician. Shop HomElectrica'ls supply today!
Image may not depict product actual color, inclusions or accessories
Upgrading to LED utility lighting with lamp ready vapor tight fixtures allows direct replacement of LED tubes into the pre-wired fixture without needing to hire an electrician. Shop HomElectrica'ls supply today!
MaxLite 44W 4 Ft Dual LED Lamp Ready Vapor Tight Linear Fixture w/ Motion Sensor features:
- Single end lamp design; Lamps Sold Separately
- Sockets are wired in series via Non-Shunted sockets.
- 18 AWG solid wiring to allow 120V-277V operation.
- Lead wires are 7' for tandem wiring, eliminating back and end knockouts.
- On/Off Motion Sensor Included.
- Able to be ceiling or wall mounted.
- Sockets are rated to 660W, 600V, UL Listed.
- Engineered to take up to 22W per set of lamp holders.
- Surface mount brackets included.
- Stainless steel spec grade hasps and clips.
- Pour in silicone seal provides hermetically sealed envelope for wet environments.
- Polycarbonate white housing and clear lens are standard.
Similar Vapor Tight Fixture Products
MaxLite LSV2XT8USE4806MSO Description
MaxLite 44W 4 Ft Dual LED Lamp Ready Vapor Tight Linear Fixture w/ Motion Sensor features:
- Single end lamp design; Lamps Sold Separately
- Sockets are wired in series via Non-Shunted sockets.
- 18 AWG solid wiring to allow 120V-277V operation.
- Lead wires are 7' for tandem wiring, eliminating back and end knockouts.
- On/Off Motion Sensor Included.
- Able to be ceiling or wall mounted.
- Sockets are rated to 660W, 600V, UL Listed.
- Engineered to take up to 22W per set of lamp holders.
- Surface mount brackets included.
- Stainless steel spec grade hasps and clips.
- Pour in silicone seal provides hermetically sealed envelope for wet environments.
- Polycarbonate white housing and clear lens are standard.
Similar Vapor Tight Fixture Products
This page is for your reference only.
Shop for similar Vapor Tight Fixture
Product Specifications
| Part Number | LSV2XT8USE4806MSO, 97517 |
| Color / Finish | White |
| Connection Type | Hardwired |
| Dimmable | No |
| Lamp Base | Medium Bi-Pin |
| Maximum Voltage | 277V |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 44W |
| Weight | 10.00-lb |
| UPC | 842219159342 |
Manufacturer Description
The MaxLite Lamp Ready Vapor tight series provides Architects, Specifiers, and Buyers with a UL listed fixture engineered to operate the latest single ended LED T8 lamps on the market. Offering classic IP65 ratings, with spec grade Stainless steel latches, these fixtures come pre-wired for single ended operating LED lamps for contractor ready installation as new or remodel fixtures
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Upgrading to LED utility lighting with lamp ready vapor tight fixtures allows direct replacement of LED tubes into the pre-wired fixture without needing to hire an electrician. Shop HomElectrica'ls supply today!
This page is for your reference only.
Shop for similar Vapor Tight Fixture
Similar Vapor Tight Fixture Products
MaxLite LSV2XT8USE4806MSO Description
MaxLite 44W 4 Ft Dual LED Lamp Ready Vapor Tight Linear Fixture w/ Motion Sensor features:
- Single end lamp design; Lamps Sold Separately
- Sockets are wired in series via Non-Shunted sockets.
- 18 AWG solid wiring to allow 120V-277V operation.
- Lead wires are 7' for tandem wiring, eliminating back and end knockouts.
- On/Off Motion Sensor Included.
- Able to be ceiling or wall mounted.
- Sockets are rated to 660W, 600V, UL Listed.
- Engineered to take up to 22W per set of lamp holders.
- Surface mount brackets included.
- Stainless steel spec grade hasps and clips.
- Pour in silicone seal provides hermetically sealed envelope for wet environments.
- Polycarbonate white housing and clear lens are standard.
Product Specifications
| Part Number | LSV2XT8USE4806MSO, 97517 |
| Color / Finish | White |
| Connection Type | Hardwired |
| Dimmable | No |
| Lamp Base | Medium Bi-Pin |
| Maximum Voltage | 277V |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 44W |
| Weight | 10.00-lb |
| UPC | 842219159342 |
Manufacturer Description
The MaxLite Lamp Ready Vapor tight series provides Architects, Specifiers, and Buyers with a UL listed fixture engineered to operate the latest single ended LED T8 lamps on the market. Offering classic IP65 ratings, with spec grade Stainless steel latches, these fixtures come pre-wired for single ended operating LED lamps for contractor ready installation as new or remodel fixtures
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?