King Electric 1500W Wall Fan Heater, 120 V

King Electric 1500W Wall Fan Heater, 120 V features:

• Shaded pole, permanently lubricated motor with C-frame type with impedance protection and sealed bearings.
• Motors same voltage as the heater.
• The motor and all wiring totally isolated from the heating chamber for protection from heated air.
• Motor equipped with a dynamically balanced four-blade aluminum impeller fan, located in the upper portion of the heat box, and provide a down-flow heating pattern.
• Assemblies constructed of coiled Nickel Chromium alloy, corrosion-resistant wire strung through a minimum of four rows of mica insulator.
• Element assemblies have factory provided connection to allow field modification to 50 percent wattage at time of installation.
• Turns off heater during any unsafe temperatures on inlet or outlet and will only reset if power is interrupted for 10 minutes.
• Simply turning thermostat down below set point will reset.
• 20-gauge electro-galvanized steel.
• Contains knockouts through which power leads are brought.
• Mounts directly to wall studs in new or existing construction.
• QuickSet stud alignment tabs, used for maintaining proper depth during new installation.
• Factory installed ground wire.
• Clearance: 6" to a side all, 4" from floor minimum.