King Electric 1500W Pic-A-Watt Wall Fan Heater, 120V

King Electric 1500W Pic-A-Watt Wall Fan Heater, 120V features:

• Quiet tangential blower - Delivering 75 CFM.
• Blower be driven by a shaded pole, permanently lubricated, C-frame type motor with impedance protection and sealed bearings.
• Motors same voltage as heater.
• Element assemblies consist of three steel sheathed heating tubes in a furnace-brazed, plate-finned, block design.
• Each sheathed tube contains coiled Ni-Chrome wire embedded in an insulator of Magnesium Oxide.
• Element assembly provides up to seven possible wattage configurations available for selection during installation.
• Not compatible with external resistors, diodes, or other weak links to obtain multiple wattages.
• Equipped with King's patented thermal overload Smart Limit Protection, which disconnects elements and motor in the event normal operating temperatures are exceeded.
• Thermal overload remains open until manually reset by turning the heater off for 15 minutes in the event a thermal overload trips due to abnormal operating temperatures.
• Automatic reset of thermal overloads, which allow the element to continue to cycle under abnormal conditions, will not be accepted.
• Louvered, one-piece design grill with rounded edges and rounded corners to prevent snags from contact with other materials.
• Epoxy powdercoated grill.
• 20-gauge electro-galvanized steel can with minimum of three knockouts.
• Depth gauge indicator, and a factory installed, insulated and stranded copper ground-wire.
• Minimum 4''clearance to floors and 6''sidewalls.
• Zero clearance to combustibles in the wall.