King Electric 13500 BTU/H ECM Hydronic Wall Heater w/Fan Switch, Medium, 120V, White
King Electric HME1012 10/13-FS-GW
SKU KNG-HME10121013FSGW
King Electric's 13500 BTU/H medium ECM hydronic wall heater with fan switch uses the energy from a buildings hot water source to offer efficient, whisper quiet operation & the ability to reduce utility bills. Shop hydronic heaters at HomElectrical now!
Image may not depict product actual color, inclusions or accessories
King Electric's 13500 BTU/H medium ECM hydronic wall heater with fan switch uses the energy from a buildings hot water source to offer efficient, whisper quiet operation & the ability to reduce utility bills. Shop hydronic heaters at HomElectrical now!
- 13500 BTU/H.
- 250 CFM.
- Up to 500 Square Feet.
- ECM Motor: Starts slowly and quietly at 50 percent of maximum speed and over a 3 to 5 minute period, if the room is not reaching the set point it will slowly ramp up to 100 percent to heat the room.
- Fan Switch: two-speed fan switch with center off.
- In-wall, fan-driven, zone-controlled heat.
- Heat only the rooms which need it, borrowing energy from what's already there: the hot water heater.
- Compatible with typical hot potable water sources.
- Tangential blowers for whisper quiet operation.
- Fast coil heating for heat transfer.
- 1/2-in trade size copper tubes.
- Flow-through design.
- 4 or 8 Aluminum fins per inch.
- Permanently lubricated motor.
- Hi / Off / Low Fan Switch.
- For use with HW Series thermostats.
- Made in USA.
- 2 Year Limited Warranty.
- cETLus Listed, cUL/UL Listed.
Similar Wall Heater - Up to 500 Sq. Ft. Products
King Electric HME1012 10/13-FS-GW Description
- 13500 BTU/H.
- 250 CFM.
- Up to 500 Square Feet.
- ECM Motor: Starts slowly and quietly at 50 percent of maximum speed and over a 3 to 5 minute period, if the room is not reaching the set point it will slowly ramp up to 100 percent to heat the room.
- Fan Switch: two-speed fan switch with center off.
- In-wall, fan-driven, zone-controlled heat.
- Heat only the rooms which need it, borrowing energy from what's already there: the hot water heater.
- Compatible with typical hot potable water sources.
- Tangential blowers for whisper quiet operation.
- Fast coil heating for heat transfer.
- 1/2-in trade size copper tubes.
- Flow-through design.
- 4 or 8 Aluminum fins per inch.
- Permanently lubricated motor.
- Hi / Off / Low Fan Switch.
- For use with HW Series thermostats.
- Made in USA.
- 2 Year Limited Warranty.
- cETLus Listed, cUL/UL Listed.
Similar Wall Heater - Up to 500 Sq. Ft. Products
Free Shipping
$4,517.59Each
In Stock-
Ships between Nov. 17 - Nov. 20
Product Specifications
| Part Number | HME1012 10/13-FS-GW |
| Air Flow (CFM) | 250 |
| Certificate | cETLus Listed, cUL/UL Listed |
| Color / Finish | White |
| Heating Technology | Hydronic |
| Made in USA | YES |
| Material | Steel |
| Maximum Voltage | 120V |
| Warranty | 2 Yr |
| Product Dimensions | 12.50-in X 15.75-in X 4.75-in |
| Weight | 27.00-lb |
| UPC | 093319213445 |
Manufacturer Description
120V BTU at 140/160 10,000/13,500 w/HI-OFF-LO FAN SWITCH
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
King Electric's 13500 BTU/H medium ECM hydronic wall heater with fan switch uses the energy from a buildings hot water source to offer efficient, whisper quiet operation & the ability to reduce utility bills. Shop hydronic heaters at HomElectrical now!
Free Shipping
$4,517.59Each
In Stock-
Ships between Nov. 17 - Nov. 20
Similar Wall Heater - Up to 500 Sq. Ft. Products
King Electric HME1012 10/13-FS-GW Description
- 13500 BTU/H.
- 250 CFM.
- Up to 500 Square Feet.
- ECM Motor: Starts slowly and quietly at 50 percent of maximum speed and over a 3 to 5 minute period, if the room is not reaching the set point it will slowly ramp up to 100 percent to heat the room.
- Fan Switch: two-speed fan switch with center off.
- In-wall, fan-driven, zone-controlled heat.
- Heat only the rooms which need it, borrowing energy from what's already there: the hot water heater.
- Compatible with typical hot potable water sources.
- Tangential blowers for whisper quiet operation.
- Fast coil heating for heat transfer.
- 1/2-in trade size copper tubes.
- Flow-through design.
- 4 or 8 Aluminum fins per inch.
- Permanently lubricated motor.
- Hi / Off / Low Fan Switch.
- For use with HW Series thermostats.
- Made in USA.
- 2 Year Limited Warranty.
- cETLus Listed, cUL/UL Listed.
Product Specifications
| Part Number | HME1012 10/13-FS-GW |
| Air Flow (CFM) | 250 |
| Certificate | cETLus Listed, cUL/UL Listed |
| Color / Finish | White |
| Heating Technology | Hydronic |
| Made in USA | YES |
| Material | Steel |
| Maximum Voltage | 120V |
| Warranty | 2 Yr |
| Product Dimensions | 12.50-in X 15.75-in X 4.75-in |
| Weight | 27.00-lb |
| UPC | 093319213445 |
Manufacturer Description
120V BTU at 140/160 10,000/13,500 w/HI-OFF-LO FAN SWITCH
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?