King Electric 11000 BTU/H ECM Hydronic Wall Heater w/Fan Switch, Medium, 120V, White
King Electric HME812 8/11-FS-GW
SKU KNG-HME812811FSGW
King Electric's 11000 BTU/H medium ECM hydronic wall heater with fan switch uses the energy from a buildings hot water source to offer efficient, whisper quiet operation & the ability to reduce utility bills. Shop hydronic heaters at HomElectrical now!
Image may not depict product actual color, inclusions or accessories
King Electric's 11000 BTU/H medium ECM hydronic wall heater with fan switch uses the energy from a buildings hot water source to offer efficient, whisper quiet operation & the ability to reduce utility bills. Shop hydronic heaters at HomElectrical now!
- 11000 BTU/H.
- Up to 425 Square Feet.
- 375 CFM.
- ECM Motor: Starts slowly and quietly at 50 percent of maximum speed and over a 3 to 5 minute period, if the room is not reaching the set point it will slowly ramp up to 100 percent to heat the room.
- Fan Switch: two-speed fan switch with center off.
- In-wall, fan-driven, zone-controlled heat.
- Heat only the rooms which need it, borrowing energy from what's already there: the hot water heater.
- Compatible with typical hot potable water sources.
- Tangential blowers for whisper quiet operation.
- Fast coil heating for heat transfer.
- 1/2-in trade size copper tubes.
- Flow-through design.
- 4 or 8 Aluminum fins per inch.
- Permanently lubricated motor.
- Hi / Off / Low Fan Switch.
- For use with HW Series thermostats.
- Made in USA.
- 2 Year Limited Warranty.
- cETLus Listed, cUL/UL Listed.
Similar Wall Heater - Up to 500 Sq. Ft. Products
King Electric HME812 8/11-FS-GW Description
- 11000 BTU/H.
- Up to 425 Square Feet.
- 375 CFM.
- ECM Motor: Starts slowly and quietly at 50 percent of maximum speed and over a 3 to 5 minute period, if the room is not reaching the set point it will slowly ramp up to 100 percent to heat the room.
- Fan Switch: two-speed fan switch with center off.
- In-wall, fan-driven, zone-controlled heat.
- Heat only the rooms which need it, borrowing energy from what's already there: the hot water heater.
- Compatible with typical hot potable water sources.
- Tangential blowers for whisper quiet operation.
- Fast coil heating for heat transfer.
- 1/2-in trade size copper tubes.
- Flow-through design.
- 4 or 8 Aluminum fins per inch.
- Permanently lubricated motor.
- Hi / Off / Low Fan Switch.
- For use with HW Series thermostats.
- Made in USA.
- 2 Year Limited Warranty.
- cETLus Listed, cUL/UL Listed.
Similar Wall Heater - Up to 500 Sq. Ft. Products
Free Shipping
Product Specifications
| Part Number | HME812 8/11-FS-GW |
| Certificate | cETLus Listed, cUL/UL Listed |
| Color / Finish | White |
| Heating Technology | Hydronic |
| Material | Steel |
| Maximum Voltage | 120V |
| Power | 11,000 BTU/H |
| Warranty | 2 Yr |
| Product Dimensions | 12.50-in X 15.75-in X 4.75-in |
| Weight | 23.00-lb |
| UPC | 093319213421 |
Manufacturer Description
HYD WALL HTR MED 8550/11200 BTU ECM W/FAN SW WHITE
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
King Electric's 11000 BTU/H medium ECM hydronic wall heater with fan switch uses the energy from a buildings hot water source to offer efficient, whisper quiet operation & the ability to reduce utility bills. Shop hydronic heaters at HomElectrical now!
Free Shipping
Similar Wall Heater - Up to 500 Sq. Ft. Products
King Electric HME812 8/11-FS-GW Description
- 11000 BTU/H.
- Up to 425 Square Feet.
- 375 CFM.
- ECM Motor: Starts slowly and quietly at 50 percent of maximum speed and over a 3 to 5 minute period, if the room is not reaching the set point it will slowly ramp up to 100 percent to heat the room.
- Fan Switch: two-speed fan switch with center off.
- In-wall, fan-driven, zone-controlled heat.
- Heat only the rooms which need it, borrowing energy from what's already there: the hot water heater.
- Compatible with typical hot potable water sources.
- Tangential blowers for whisper quiet operation.
- Fast coil heating for heat transfer.
- 1/2-in trade size copper tubes.
- Flow-through design.
- 4 or 8 Aluminum fins per inch.
- Permanently lubricated motor.
- Hi / Off / Low Fan Switch.
- For use with HW Series thermostats.
- Made in USA.
- 2 Year Limited Warranty.
- cETLus Listed, cUL/UL Listed.
Product Specifications
| Part Number | HME812 8/11-FS-GW |
| Certificate | cETLus Listed, cUL/UL Listed |
| Color / Finish | White |
| Heating Technology | Hydronic |
| Material | Steel |
| Maximum Voltage | 120V |
| Power | 11,000 BTU/H |
| Warranty | 2 Yr |
| Product Dimensions | 12.50-in X 15.75-in X 4.75-in |
| Weight | 23.00-lb |
| UPC | 093319213421 |
Manufacturer Description
HYD WALL HTR MED 8550/11200 BTU ECM W/FAN SW WHITE
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?