Ericson 30A Pin & Sleeve Inlet, Angled, IP67, 1 Ph, 3P/4W, 125V/250V, GY/OR
Ericson 430BA12W
SKU ERC-430BA12W
Ericson's 30A pin & sleeve inlet is watertight and provides complete protection against dirt, dust, water jets & even temporary flooding. Angled 3-pole, 4-wire, configuration and rated for 125V/250V installation. Check out more at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
Ericson's 30A pin & sleeve inlet is watertight and provides complete protection against dirt, dust, water jets & even temporary flooding. Angled 3-pole, 4-wire, configuration and rated for 125V/250V installation. Check out more at HomElectrical today!
- 30 Amp; 125V/250V; 1 Phase.
- 3-Pole/4-Wire; Watertight (IP67).
- Angled Inlet.
- Locking ring and gasket provides positive mechanical lock between male and female devices and receptacles to prevent intrusion of moisture, dirt and dust.
- Oversized ground contact and sequential early make, late break contact structure ensures safe connection and disconnection.
- Shrouded and recessed pins are protected from physical damage.
- Recessed contact sleeves protect from accidental touch potential.
- Color-coded devices prevent confusion with voltage ratings.
- External cable gland with onion-ring neoprene bushing assure watertight integrity.
- External cord clamp with bell housing to allow cord to exit at various angles without severing cable jacket.
Similar Pin and Sleeve Connectors Products
Ericson 430BA12W Description
- 30 Amp; 125V/250V; 1 Phase.
- 3-Pole/4-Wire; Watertight (IP67).
- Angled Inlet.
- Locking ring and gasket provides positive mechanical lock between male and female devices and receptacles to prevent intrusion of moisture, dirt and dust.
- Oversized ground contact and sequential early make, late break contact structure ensures safe connection and disconnection.
- Shrouded and recessed pins are protected from physical damage.
- Recessed contact sleeves protect from accidental touch potential.
- Color-coded devices prevent confusion with voltage ratings.
- External cable gland with onion-ring neoprene bushing assure watertight integrity.
- External cord clamp with bell housing to allow cord to exit at various angles without severing cable jacket.
Similar Pin and Sleeve Connectors Products
Free Shipping
$227.49Each
Usually Ships 2-4 Weeks
Product Specifications
| Part Number | 430BA12W |
| Certificate | cUL/UL Listed, RoHS Compliant |
| Color / Finish | Gray, Orange |
| Control Style | 3-Pole |
| Electrical Phase | 1 Ph |
| Maximum Amperage | 30 Amp |
| Maximum Voltage | 125V/250V |
| Warranty | 1 Yr |
| Product Dimensions | 5.12-in X 4.45-in X 3.78-in |
| Weight | 2.00-lb |
| UPC | 782862932810 |
Manufacturer Description
IEC 309 PIN & SLEEVE ANGLED INLET, 30A 125/250V 1PH 3P/4W, WATERTIGHT (IP67)
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Ericson's 30A pin & sleeve inlet is watertight and provides complete protection against dirt, dust, water jets & even temporary flooding. Angled 3-pole, 4-wire, configuration and rated for 125V/250V installation. Check out more at HomElectrical today!
Free Shipping
$227.49Each
Usually Ships 2-4 Weeks
Similar Pin and Sleeve Connectors Products
Ericson 430BA12W Description
- 30 Amp; 125V/250V; 1 Phase.
- 3-Pole/4-Wire; Watertight (IP67).
- Angled Inlet.
- Locking ring and gasket provides positive mechanical lock between male and female devices and receptacles to prevent intrusion of moisture, dirt and dust.
- Oversized ground contact and sequential early make, late break contact structure ensures safe connection and disconnection.
- Shrouded and recessed pins are protected from physical damage.
- Recessed contact sleeves protect from accidental touch potential.
- Color-coded devices prevent confusion with voltage ratings.
- External cable gland with onion-ring neoprene bushing assure watertight integrity.
- External cord clamp with bell housing to allow cord to exit at various angles without severing cable jacket.
Product Specifications
| Part Number | 430BA12W |
| Certificate | cUL/UL Listed, RoHS Compliant |
| Color / Finish | Gray, Orange |
| Control Style | 3-Pole |
| Electrical Phase | 1 Ph |
| Maximum Amperage | 30 Amp |
| Maximum Voltage | 125V/250V |
| Warranty | 1 Yr |
| Product Dimensions | 5.12-in X 4.45-in X 3.78-in |
| Weight | 2.00-lb |
| UPC | 782862932810 |
Manufacturer Description
IEC 309 PIN & SLEEVE ANGLED INLET, 30A 125/250V 1PH 3P/4W, WATERTIGHT (IP67)
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?