Gardner Bender's Hydraulic Bender w/o Pump includes shoe groups 2.5-in, 3.0-in, 3.5-in & 4.0-in and bends 2.5 to 4-in rigid, rigid aluminum, EMT and IMC conduit. Shop our full selection of Gardner Bender's products at HomElectrical today!
Gardner Bender Hydraulic Bender System w/o Pump Features:
- Includes shoe groups 2.5-in, 3.0-in, 3.5-in and 4.0-in.
- Includes: MB400 Bend-Mate Table, Long Stroke Ultra Eegor Hydraulic Bender (B400L), 1 Each Bending Shoe sizes: 2.5-in, 3-in, 3.5-in, 4-in, 1 Each Follow bar size; 2.5-in, 3-in, 3.5-in, 4-in, 1 Each U-strap sizes: 2.5-in, 3-in, 3.5-in, 4-in, U-strap Pin, Bend Shoe Pin, 30-Ton Double-Acting Hyd. Cyl, 2 - 10-ft Hoses w/High-Flow Coupler and Double Anchor Frame Pin.
- Bends 2.5 inch to 4 inch Rigid, Rigid aluminum, EMT and IMC conduit.
- 30 ton 28 inch stroke cylinder is capable of making 90 degree bends in one pass.
- Hydraulic power ensures the smoothest bends without deformations to the conduit.
- Double -acting cylinder offers rapid retraction regardless of hose lengths and system losses.
- Conduit is automatically stripped free from the shoe during the return cycle virtually eliminating extra labor or damaged conduit.
- Ample work/bending area.
- Convenient Cylinder support.
- Single person set-up.
- Fits through 32 in doorway (28 in wide table).
- Forklift pockets on all four sides.
- Onboard storage for all bending shoes, follow bars, pins and hydraulic pump.
- Security bars protect shoes follow bars, pump and bender for overnight storage on the job site.
- Protected hose routing.
- Dimensions: 79-in (L) x 28-in (W) x 43.5-in (H).