Eaton Wiring 1000W Occupancy Sensor Switch w/ Night Light, 120V, Gray
Eaton Wiring OS310U-GY-K
SKU ETW-OS310UGYK
Eaton Wiring's 1000W occupancy sensor with night light can be wired as a single pole or 3-way device. Gray finish with wall plate included. Add this occupancy sensor to your car today at HomElectrical.com!
Image may not depict product actual color, inclusions or accessories
Eaton Wiring's 1000W occupancy sensor with night light can be wired as a single pole or 3-way device. Gray finish with wall plate included. Add this occupancy sensor to your car today at HomElectrical.com!
- Gray Finish.
- Compatible with LED, CFL, FLR, INC/HAL, ELV, MLV.
- Can be wired as a single pole or 3-way device.
- Selectable ON/OFF LED nightlight with press and hold dimming function.
- Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection.
- Push pad design provides minimal travel and crisp actuation.
- Replaces a standard light or fan switch.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Provides 3-way operation when used with a 3-way switch or sensor.
- Selectable time delay of 5 seconds (test), 5 minutes, 10 minutes and 20 minutes for lights to remain ON after room is vacated.
- Provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Allows toggling between Auto ON/Auto OFF or Manual ON /Auto OFF mode with a simple press and hold of switch.
- Provides for a bypass feature to allow the sensor to perform as a traditional switch (Manual ON/Manual OFF).
- Electrostatic discharge protection.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Neutral required for installation of device.
- Mid-size decorator wallplate included with product.
Similar In-Wall Occupancy & Motion Sensor Products
Eaton Wiring OS310U-GY-K Description
- Gray Finish.
- Compatible with LED, CFL, FLR, INC/HAL, ELV, MLV.
- Can be wired as a single pole or 3-way device.
- Selectable ON/OFF LED nightlight with press and hold dimming function.
- Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection.
- Push pad design provides minimal travel and crisp actuation.
- Replaces a standard light or fan switch.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Provides 3-way operation when used with a 3-way switch or sensor.
- Selectable time delay of 5 seconds (test), 5 minutes, 10 minutes and 20 minutes for lights to remain ON after room is vacated.
- Provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Allows toggling between Auto ON/Auto OFF or Manual ON /Auto OFF mode with a simple press and hold of switch.
- Provides for a bypass feature to allow the sensor to perform as a traditional switch (Manual ON/Manual OFF).
- Electrostatic discharge protection.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Neutral required for installation of device.
- Mid-size decorator wallplate included with product.
Similar In-Wall Occupancy & Motion Sensor Products
Free Shipping Eligible
$41.98Each
Usually Ships 8-14 Business Days
Product Specifications
| Part Number | OS310U-GY-K |
| Certificate | cUL/UL Listed |
| Color / Finish | Gray |
| Maximum Voltage | 120V |
| Wattage | 1000W |
| Weight | 0.30-lb |
| UPC | 032664710292 |
Manufacturer Description
Occ Switch,SP/3W,1000W,UNV,NLight GY
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton Wiring's 1000W occupancy sensor with night light can be wired as a single pole or 3-way device. Gray finish with wall plate included. Add this occupancy sensor to your car today at HomElectrical.com!
Free Shipping Eligible
$41.98Each
Usually Ships 8-14 Business Days
Similar In-Wall Occupancy & Motion Sensor Products
Eaton Wiring OS310U-GY-K Description
- Gray Finish.
- Compatible with LED, CFL, FLR, INC/HAL, ELV, MLV.
- Can be wired as a single pole or 3-way device.
- Selectable ON/OFF LED nightlight with press and hold dimming function.
- Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection.
- Push pad design provides minimal travel and crisp actuation.
- Replaces a standard light or fan switch.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Provides 3-way operation when used with a 3-way switch or sensor.
- Selectable time delay of 5 seconds (test), 5 minutes, 10 minutes and 20 minutes for lights to remain ON after room is vacated.
- Provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Allows toggling between Auto ON/Auto OFF or Manual ON /Auto OFF mode with a simple press and hold of switch.
- Provides for a bypass feature to allow the sensor to perform as a traditional switch (Manual ON/Manual OFF).
- Electrostatic discharge protection.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Neutral required for installation of device.
- Mid-size decorator wallplate included with product.
Product Specifications
| Part Number | OS310U-GY-K |
| Certificate | cUL/UL Listed |
| Color / Finish | Gray |
| Maximum Voltage | 120V |
| Wattage | 1000W |
| Weight | 0.30-lb |
| UPC | 032664710292 |
Manufacturer Description
Occ Switch,SP/3W,1000W,UNV,NLight GY
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?