American Lighting Neonflex Series

To connect an LED Strip light, you will need to follow some simple steps. Below are the steps to cutting and connecting the LED Strip Lights.

1. Measure the space where you want to place the lights.
2. Use that measurement to mark the place on the light to cut.
3. Find the designated cut lines on the strip light.
4. Cut the light along the designated lines based on your markings.
5. Choose between a clip on and a fold-over connector to connect the strips together.
6. Gently slide the light into the connector and align the wires.
7. Lock the connector into place and then test the LED strip lights.

To fix an LED strip light, you will first need to find the place where the light stops working and where the four connections are labeled. Then with a sharp object, separate the faulty strip from the strip that is working. Once the strips are separated, place a new strip next to the working strip and solder them together based on the letter connections. After soldering, plug the light into the wall and test to see if the lights start working properly.

Common reasons for your LED strip light not to work include:

• Power supply issues
• Dead LEDs
• Faulty connections
• Damage to the strip light