Lamp Shining 60W LED Shoebox Retrofit Kit, 7980 Lumens, 4100K
Lamp Shining LSRK-60W40
SKU LSL-LSRK60W41K
Lamp Shining LED's LED Retrofit Kits are cost effective and energy efficient replacements for Metal Halide, HPS, and Mercury lamps. Replace your inefficient fixtures with HomElectrical's selection of competitively priced LED products.
Image may not depict product actual color, inclusions or accessories
Lamp Shining LED's LED Retrofit Kits are cost effective and energy efficient replacements for Metal Halide, HPS, and Mercury lamps. Replace your inefficient fixtures with HomElectrical's selection of competitively priced LED products.
Lamp Shining LED 60W LED Shoebox Retrofit Kit, 7980 Lumens, 4100K features:
- Easy installation into existing fixtures.
- Ballast Bypass - no ballast required.
- High voltage option for circuits needing 340 volts to 480 volts.
- 120° beam angle for focused light where it is needed.
- InstantOn technology - no flickering or wasted energy.
- Equivalent to a 500W metal halide bulb.
- Eco-friendly with no mercury, UV, or IR radiation emission.
- Type III light distribution for outward projecting lighting.
- 5000K color temperature provides a vibrant and alert cool white light that is ideal for commercial, industrial, and institutional applications.
- Operating temperature range of -49°F to 122°F for optimal use indoors or outdoors, even in extreme conditions.
- 50,000 lifetime hours guarantee over a decade of operation at 12 hours a day, 7 days a week.
- Dimensions: 6.25"(L) x 5.75"(W) x 5.25"(H); Extended Length: 7.75".
- Ideal replacement for 400W fixtures hung 20 feet and below
- Limited warranty is set for five years from the date of invoice.
Similar LED Shoebox Retrofit Kit Products
Lamp Shining LSRK-60W40 Description
Lamp Shining LED 60W LED Shoebox Retrofit Kit, 7980 Lumens, 4100K features:
- Easy installation into existing fixtures.
- Ballast Bypass - no ballast required.
- High voltage option for circuits needing 340 volts to 480 volts.
- 120° beam angle for focused light where it is needed.
- InstantOn technology - no flickering or wasted energy.
- Equivalent to a 500W metal halide bulb.
- Eco-friendly with no mercury, UV, or IR radiation emission.
- Type III light distribution for outward projecting lighting.
- 5000K color temperature provides a vibrant and alert cool white light that is ideal for commercial, industrial, and institutional applications.
- Operating temperature range of -49°F to 122°F for optimal use indoors or outdoors, even in extreme conditions.
- 50,000 lifetime hours guarantee over a decade of operation at 12 hours a day, 7 days a week.
- Dimensions: 6.25"(L) x 5.75"(W) x 5.25"(H); Extended Length: 7.75".
- Ideal replacement for 400W fixtures hung 20 feet and below
- Limited warranty is set for five years from the date of invoice.
Similar LED Shoebox Retrofit Kit Products
This page is for your reference only.
Shop for similar LED Shoebox Retrofit Kit
Product Specifications
| Part Number | LSRK-60W40 |
| Beam Angle | 120 |
| Certificate | DLC Listed, ETL Listed |
| Color Temperature | 4100K |
| Connection Type | Hardwired |
| CRI | 80+ |
| Dimmable | No |
| Efficacy | 133 lm/W |
| Lamp Base | E26, E39 |
| Life Hours | 50000 |
| Lumens | 7980 lm |
| Maximum Voltage | 100V-300V |
| Sealed Battery | No |
| Warranty | 5 Yr |
| Wattage | 60W |
| Wattage Equivalent | 250W MH |
| Product Dimensions | 6.25-in X 5.75-in X 5.25-in |
| Weight | 1.67-lb |
Manufacturer Description
- 5 years warranty.
- 0-10V Dimmable Optional.
- Various beam angle of 120 degree.
- Original Philips SMD 3030 LEDs which is up to 133Lm/W.
- Arm adjustable with any beam angle.
- With a big Sunon fan(60,000hours).
- Body Temperature:<55 oC @Ta=25 oC
- With the most excellent quality meanwell driver.
- Available with both 100-300VAC & 347VAC & 480VAC.
- Using aluminum fin heat sink which heat transfer faster than die cast.
- Tiny package and lighter,lower freight cost,more competitive in the market.
- Avaialble for low bay fixture,street pole,canopy,parking lot shoebox,wall pack,high bay fixtures etc.
- ETL cETL TUV CE RoHS SAA FCC DLC Ctick certified
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Lamp Shining LED's LED Retrofit Kits are cost effective and energy efficient replacements for Metal Halide, HPS, and Mercury lamps. Replace your inefficient fixtures with HomElectrical's selection of competitively priced LED products.
This page is for your reference only.
Shop for similar LED Shoebox Retrofit Kit
Similar LED Shoebox Retrofit Kit Products
Lamp Shining LSRK-60W40 Description
Lamp Shining LED 60W LED Shoebox Retrofit Kit, 7980 Lumens, 4100K features:
- Easy installation into existing fixtures.
- Ballast Bypass - no ballast required.
- High voltage option for circuits needing 340 volts to 480 volts.
- 120° beam angle for focused light where it is needed.
- InstantOn technology - no flickering or wasted energy.
- Equivalent to a 500W metal halide bulb.
- Eco-friendly with no mercury, UV, or IR radiation emission.
- Type III light distribution for outward projecting lighting.
- 5000K color temperature provides a vibrant and alert cool white light that is ideal for commercial, industrial, and institutional applications.
- Operating temperature range of -49°F to 122°F for optimal use indoors or outdoors, even in extreme conditions.
- 50,000 lifetime hours guarantee over a decade of operation at 12 hours a day, 7 days a week.
- Dimensions: 6.25"(L) x 5.75"(W) x 5.25"(H); Extended Length: 7.75".
- Ideal replacement for 400W fixtures hung 20 feet and below
- Limited warranty is set for five years from the date of invoice.
Product Specifications
| Part Number | LSRK-60W40 |
| Beam Angle | 120 |
| Certificate | DLC Listed, ETL Listed |
| Color Temperature | 4100K |
| Connection Type | Hardwired |
| CRI | 80+ |
| Dimmable | No |
| Efficacy | 133 lm/W |
| Lamp Base | E26, E39 |
| Life Hours | 50000 |
| Lumens | 7980 lm |
| Maximum Voltage | 100V-300V |
| Sealed Battery | No |
| Warranty | 5 Yr |
| Wattage | 60W |
| Wattage Equivalent | 250W MH |
| Product Dimensions | 6.25-in X 5.75-in X 5.25-in |
| Weight | 1.67-lb |
Manufacturer Description
- 5 years warranty.
- 0-10V Dimmable Optional.
- Various beam angle of 120 degree.
- Original Philips SMD 3030 LEDs which is up to 133Lm/W.
- Arm adjustable with any beam angle.
- With a big Sunon fan(60,000hours).
- Body Temperature:<55 oC @Ta=25 oC
- With the most excellent quality meanwell driver.
- Available with both 100-300VAC & 347VAC & 480VAC.
- Using aluminum fin heat sink which heat transfer faster than die cast.
- Tiny package and lighter,lower freight cost,more competitive in the market.
- Avaialble for low bay fixture,street pole,canopy,parking lot shoebox,wall pack,high bay fixtures etc.
- ETL cETL TUV CE RoHS SAA FCC DLC Ctick certified
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?