Qmark Heater 2250W 6 Foot Commercial CPH Series Pedestal Convection Heater, White
Qmark Heater CPH07A6375
SKU QMK-CPH07A6375W
Image may not depict product actual color, inclusions or accessories
Qmark 2250W 6 Foot Commercial CPH Series Pedestal Convection Heater Features:
- Made to order design
- Two heating elements.
- 375 watts per foot.
- Primary, secondary, or supplemental heat.
- Right or left-hand entry/wiring flexibility with identical pre-wired junction boxes at either end.
- Perfect for under-the-window heat loss and condensation prevention.
- Units can be mounted from wall-to-wall or as discrete units in standard lengths of 28 inches to 10 feet.
- Durable front cover constructed of 16-gauge steel.
- Pedestal-mounted design; bottom-inlet - top outlet.
- Units may contain 1-3 heating elements that yield a broad range of heating capacity.
- Optional 0.25 inch mesh located under the discharge grille to deter insertion of objects and restriction of airflow.
- Built-in wire way with factory-installed wiring rated 45 amps.
- Easy connection of supply wiring from bottom, rear or end, as well as multiple wiring of adjacent heaters from one entry point.
- For service, all internal parts are accessible by removing the cover.
- Amps at 208V: 10.8; at 240V: 9.4; at 277V: 8.1; at 347V: 6.5; at 600V: 3.7.
- Optional built-in controls available (sold separately): line voltage thermostat, power on/off switch, power relay, or transformer relay for an additional cost.
- Optional end cap on each end for an additional cost.
- Pedestals not included.
Ideal Applications:
- Institutional and commercial.
- Offices.
- Hallways.
- Lobbies.
- Condos.
- Conference Rooms.
- Retail Spaces.
- Terminals.
- Other areas without wall mounting options.
Qmark Heater CPH07A6375 Accessories
Qmark Heater CPH07A6375 Accessories
Similar Convection Heater Products
Qmark Heater CPH07A6375 Description
Qmark 2250W 6 Foot Commercial CPH Series Pedestal Convection Heater Features:
- Made to order design
- Two heating elements.
- 375 watts per foot.
- Primary, secondary, or supplemental heat.
- Right or left-hand entry/wiring flexibility with identical pre-wired junction boxes at either end.
- Perfect for under-the-window heat loss and condensation prevention.
- Units can be mounted from wall-to-wall or as discrete units in standard lengths of 28 inches to 10 feet.
- Durable front cover constructed of 16-gauge steel.
- Pedestal-mounted design; bottom-inlet - top outlet.
- Units may contain 1-3 heating elements that yield a broad range of heating capacity.
- Optional 0.25 inch mesh located under the discharge grille to deter insertion of objects and restriction of airflow.
- Built-in wire way with factory-installed wiring rated 45 amps.
- Easy connection of supply wiring from bottom, rear or end, as well as multiple wiring of adjacent heaters from one entry point.
- For service, all internal parts are accessible by removing the cover.
- Amps at 208V: 10.8; at 240V: 9.4; at 277V: 8.1; at 347V: 6.5; at 600V: 3.7.
- Optional built-in controls available (sold separately): line voltage thermostat, power on/off switch, power relay, or transformer relay for an additional cost.
- Optional end cap on each end for an additional cost.
- Pedestals not included.
Ideal Applications:
- Institutional and commercial.
- Offices.
- Hallways.
- Lobbies.
- Condos.
- Conference Rooms.
- Retail Spaces.
- Terminals.
- Other areas without wall mounting options.
Qmark Heater CPH07A6375 Accessories
Similar Convection Heater Products
This page is for your reference only.
Shop for similar Convection Heater
Product Specifications
| Part Number | CPH07A6375 |
| Application Type | All Purposes |
| Color / Finish | White |
| Compartment | One-Compartment |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Material | Steel |
| Maximum Amperage | 10.8 Amp |
| Maximum Voltage | 600V |
| Power Type | Hardwired |
| Room Size | 300 Sq Ft |
| Sealed Battery | No |
| Wattage | 2250W |
| Product Dimensions | 6-ft X 5-in X 7-in |
| Weight | 44.00-lb |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This page is for your reference only.
Shop for similar Convection Heater
Qmark Heater CPH07A6375 Accessories
Similar Convection Heater Products
Qmark Heater CPH07A6375 Description
Qmark 2250W 6 Foot Commercial CPH Series Pedestal Convection Heater Features:
- Made to order design
- Two heating elements.
- 375 watts per foot.
- Primary, secondary, or supplemental heat.
- Right or left-hand entry/wiring flexibility with identical pre-wired junction boxes at either end.
- Perfect for under-the-window heat loss and condensation prevention.
- Units can be mounted from wall-to-wall or as discrete units in standard lengths of 28 inches to 10 feet.
- Durable front cover constructed of 16-gauge steel.
- Pedestal-mounted design; bottom-inlet - top outlet.
- Units may contain 1-3 heating elements that yield a broad range of heating capacity.
- Optional 0.25 inch mesh located under the discharge grille to deter insertion of objects and restriction of airflow.
- Built-in wire way with factory-installed wiring rated 45 amps.
- Easy connection of supply wiring from bottom, rear or end, as well as multiple wiring of adjacent heaters from one entry point.
- For service, all internal parts are accessible by removing the cover.
- Amps at 208V: 10.8; at 240V: 9.4; at 277V: 8.1; at 347V: 6.5; at 600V: 3.7.
- Optional built-in controls available (sold separately): line voltage thermostat, power on/off switch, power relay, or transformer relay for an additional cost.
- Optional end cap on each end for an additional cost.
- Pedestals not included.
Ideal Applications:
- Institutional and commercial.
- Offices.
- Hallways.
- Lobbies.
- Condos.
- Conference Rooms.
- Retail Spaces.
- Terminals.
- Other areas without wall mounting options.
Product Specifications
| Part Number | CPH07A6375 |
| Application Type | All Purposes |
| Color / Finish | White |
| Compartment | One-Compartment |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Material | Steel |
| Maximum Amperage | 10.8 Amp |
| Maximum Voltage | 600V |
| Power Type | Hardwired |
| Room Size | 300 Sq Ft |
| Sealed Battery | No |
| Wattage | 2250W |
| Product Dimensions | 6-ft X 5-in X 7-in |
| Weight | 44.00-lb |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?