Eaton Wiring 2200W Vacancy Sensor & Dimmer w/LED Indicator, Ivory
Eaton Wiring VS10D7-V
SKU ETW-VS10D7V
Eaton Wiring's 2200W Vacancy Sensor & Dimmer w/LED Indicator, with an ivory color finish, features a full-range preset dimming control provided with a horizontal dim/bright bar. Shop our full selection of Eaton Wiring's products at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
Eaton Wiring's 2200W Vacancy Sensor & Dimmer w/LED Indicator, with an ivory color finish, features a full-range preset dimming control provided with a horizontal dim/bright bar. Shop our full selection of Eaton Wiring's products at HomElectrical today!
Eaton Wiring 2200W Vacancy Sensor & Dimmer w/LED Indicator, Ivory features:
- Single pole & 3-Way.
- 10A @ 120V/AC, 8A @ 277V/AC.
- 0-10VDC FLR and LED ballasts.
- Wattage, Voltage: 1200W, 120V; 2200W, 277V.
- Full-range Preset dimming control provided with horizontal dim/bright bar.
- Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
- Single green LED indicates motion.
- Push pad design provides minimal travel and crisp actuation.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
- Adjustable high-end and low-end trim setting.
- Vacancy Sensor meets California Title 20.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Compatible with dimmable 0-10V LED and FLR ballasts.
- Neutral required for installation of device.
- Color Finish: Ivory.
Similar Dimmer Switches Products
Eaton Wiring VS10D7-V Description
Eaton Wiring 2200W Vacancy Sensor & Dimmer w/LED Indicator, Ivory features:
- Single pole & 3-Way.
- 10A @ 120V/AC, 8A @ 277V/AC.
- 0-10VDC FLR and LED ballasts.
- Wattage, Voltage: 1200W, 120V; 2200W, 277V.
- Full-range Preset dimming control provided with horizontal dim/bright bar.
- Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
- Single green LED indicates motion.
- Push pad design provides minimal travel and crisp actuation.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
- Adjustable high-end and low-end trim setting.
- Vacancy Sensor meets California Title 20.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Compatible with dimmable 0-10V LED and FLR ballasts.
- Neutral required for installation of device.
- Color Finish: Ivory.
Similar Dimmer Switches Products
This page is for your reference only.
Shop for similar Dimmer Switches
Product Specifications
| Part Number | VS10D7-V |
| Certificate | cUL/UL Listed |
| Color / Finish | Ivory |
| Control Style | Single Pole |
| Maximum Amperage | 10 Amp |
| Maximum Voltage | 277V |
| Wattage | 2200W |
| Product Dimensions | 4.20-in X 1.96-in X 2.75-in |
| Weight | 0.28-lb |
| UPC | 032664748660 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton Wiring's 2200W Vacancy Sensor & Dimmer w/LED Indicator, with an ivory color finish, features a full-range preset dimming control provided with a horizontal dim/bright bar. Shop our full selection of Eaton Wiring's products at HomElectrical today!
This page is for your reference only.
Shop for similar Dimmer Switches
Similar Dimmer Switches Products
Eaton Wiring VS10D7-V Description
Eaton Wiring 2200W Vacancy Sensor & Dimmer w/LED Indicator, Ivory features:
- Single pole & 3-Way.
- 10A @ 120V/AC, 8A @ 277V/AC.
- 0-10VDC FLR and LED ballasts.
- Wattage, Voltage: 1200W, 120V; 2200W, 277V.
- Full-range Preset dimming control provided with horizontal dim/bright bar.
- Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
- Single green LED indicates motion.
- Push pad design provides minimal travel and crisp actuation.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
- Adjustable high-end and low-end trim setting.
- Vacancy Sensor meets California Title 20.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Compatible with dimmable 0-10V LED and FLR ballasts.
- Neutral required for installation of device.
- Color Finish: Ivory.
Product Specifications
| Part Number | VS10D7-V |
| Certificate | cUL/UL Listed |
| Color / Finish | Ivory |
| Control Style | Single Pole |
| Maximum Amperage | 10 Amp |
| Maximum Voltage | 277V |
| Wattage | 2200W |
| Product Dimensions | 4.20-in X 1.96-in X 2.75-in |
| Weight | 0.28-lb |
| UPC | 032664748660 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?