Stelpro 1250W 6-ft Patio Door Heater, 200W/Ft, 4266 BTU/H, 277V, Off White
Stelpro PDH1257SW
SKU STP-PDH1257SW
This baseboard heater was designed to provide a constant flow of heat near patio doors and bay windows. It creates a "curtain of air" that prevents the build-up of condensation on your windows. Shop for more Stelpro products at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
This baseboard heater was designed to provide a constant flow of heat near patio doors and bay windows. It creates a "curtain of air" that prevents the build-up of condensation on your windows. Shop for more Stelpro products at HomElectrical today!
- MADE TO ORDER | Cannot be Cancelled
- Epoxy-polyester powdercoat keeps unit from corrosion.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noise.
- 4 inch by 4 inch compact profile.
- Solid, 18-gauge steel cabinet and front that may be used as a step.
- Thermal protection with automatic reset prevents fire hazards and over heating.
- Full-length wireway.
- Pencil-proof openings less than 1/4 inch prevents unwanted objects from entering unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in thermostat accessible without removing front grill, installed in the left junction box only (optional)
- Low voltage relay kit installed in the left or right junction box
- Surface mounted - wall or floor mounted with or without pedestal kit (optional).
- Wiring compartment at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional)
- CAS US.
Similar Baseboard Heater - Up to 150 sq. ft. Products
Stelpro PDH1257SW Description
- MADE TO ORDER | Cannot be Cancelled
- Epoxy-polyester powdercoat keeps unit from corrosion.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noise.
- 4 inch by 4 inch compact profile.
- Solid, 18-gauge steel cabinet and front that may be used as a step.
- Thermal protection with automatic reset prevents fire hazards and over heating.
- Full-length wireway.
- Pencil-proof openings less than 1/4 inch prevents unwanted objects from entering unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in thermostat accessible without removing front grill, installed in the left junction box only (optional)
- Low voltage relay kit installed in the left or right junction box
- Surface mounted - wall or floor mounted with or without pedestal kit (optional).
- Wiring compartment at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional)
- CAS US.
Similar Baseboard Heater - Up to 150 sq. ft. Products
Product Specifications
| Part Number | PDH1257SW |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Power | 4,266 BTU/H |
| Warranty | 3 Yr |
| Wattage | 1250W |
| Product Dimensions | 4.06-in X 3-in X 4-in |
| Weight | 25.00-lb |
| UPC | 626296360767 |
Manufacturer Description
PATIO DOOR HEATER SOFT WHITE 1250W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This baseboard heater was designed to provide a constant flow of heat near patio doors and bay windows. It creates a "curtain of air" that prevents the build-up of condensation on your windows. Shop for more Stelpro products at HomElectrical today!
Similar Baseboard Heater - Up to 150 sq. ft. Products
Stelpro PDH1257SW Description
- MADE TO ORDER | Cannot be Cancelled
- Epoxy-polyester powdercoat keeps unit from corrosion.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noise.
- 4 inch by 4 inch compact profile.
- Solid, 18-gauge steel cabinet and front that may be used as a step.
- Thermal protection with automatic reset prevents fire hazards and over heating.
- Full-length wireway.
- Pencil-proof openings less than 1/4 inch prevents unwanted objects from entering unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in thermostat accessible without removing front grill, installed in the left junction box only (optional)
- Low voltage relay kit installed in the left or right junction box
- Surface mounted - wall or floor mounted with or without pedestal kit (optional).
- Wiring compartment at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional)
- CAS US.
Product Specifications
| Part Number | PDH1257SW |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Power | 4,266 BTU/H |
| Warranty | 3 Yr |
| Wattage | 1250W |
| Product Dimensions | 4.06-in X 3-in X 4-in |
| Weight | 25.00-lb |
| UPC | 626296360767 |
Manufacturer Description
PATIO DOOR HEATER SOFT WHITE 1250W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?