Ericson 2-in Conduit Riser Grip, Single, Split, Rod, 1.25 - 1.49-in Cable
Ericson CRG-C2-RC-125
SKU ERC-CRGC2RC125
Ericson's 2-in single, split, rod close conduit riser grip for 1.25 - 1.49 cable diameter is designed to prevent cable creep in conduit and help prevent cable pullout. Browse more Ericson products at HomElectrical.com today!
Image may not depict product actual color, inclusions or accessories
Ericson's 2-in single, split, rod close conduit riser grip for 1.25 - 1.49 cable diameter is designed to prevent cable creep in conduit and help prevent cable pullout. Browse more Ericson products at HomElectrical.com today!
- Single Weave; Split Mesh.
- Rod Closing.
- Cable Diameter: 1.25-in to 1.49-in.
- Length: 13-in.
- Approximate Breaking Strength: 1610 lbs.
- Conduit Size: 2-in.
- Used to support cable runs in vertical or sloping standard rigid conduit.
- They are designed to prevent cable creep in conduit and help prevent cable pullouts.
- Installs quickly and easily with no damage to electrical cable.
- The mesh is attached to a support ring, which sits on the conduit requiring no extra hardware to attach.
- Fittings, bushings, or couplings may be threaded on the conduit with the grip in place.
- Stranded tinned bronze wire.
Similar Strain Relief Cord Grip Products
Ericson CRG-C2-RC-125 Description
- Single Weave; Split Mesh.
- Rod Closing.
- Cable Diameter: 1.25-in to 1.49-in.
- Length: 13-in.
- Approximate Breaking Strength: 1610 lbs.
- Conduit Size: 2-in.
- Used to support cable runs in vertical or sloping standard rigid conduit.
- They are designed to prevent cable creep in conduit and help prevent cable pullouts.
- Installs quickly and easily with no damage to electrical cable.
- The mesh is attached to a support ring, which sits on the conduit requiring no extra hardware to attach.
- Fittings, bushings, or couplings may be threaded on the conduit with the grip in place.
- Stranded tinned bronze wire.
Similar Strain Relief Cord Grip Products
This page is for your reference only.
Shop for similar Strain Relief Cord Grip
Product Specifications
| Part Number | CRG-C2-RC-125 |
| Weight | 1.25-lb |
| UPC | 782862886908 |
Manufacturer Description
E-GRIP CONDUIT RISER GRIP SINGLE WEAVE SPLIT MESH ROD CLOSING CABLE DIA 1.25 - 1.49 CONDUIT DIA 2"
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Ericson's 2-in single, split, rod close conduit riser grip for 1.25 - 1.49 cable diameter is designed to prevent cable creep in conduit and help prevent cable pullout. Browse more Ericson products at HomElectrical.com today!
This page is for your reference only.
Shop for similar Strain Relief Cord Grip
Similar Strain Relief Cord Grip Products
Ericson CRG-C2-RC-125 Description
- Single Weave; Split Mesh.
- Rod Closing.
- Cable Diameter: 1.25-in to 1.49-in.
- Length: 13-in.
- Approximate Breaking Strength: 1610 lbs.
- Conduit Size: 2-in.
- Used to support cable runs in vertical or sloping standard rigid conduit.
- They are designed to prevent cable creep in conduit and help prevent cable pullouts.
- Installs quickly and easily with no damage to electrical cable.
- The mesh is attached to a support ring, which sits on the conduit requiring no extra hardware to attach.
- Fittings, bushings, or couplings may be threaded on the conduit with the grip in place.
- Stranded tinned bronze wire.
Product Specifications
| Part Number | CRG-C2-RC-125 |
| Weight | 1.25-lb |
| UPC | 782862886908 |
Manufacturer Description
E-GRIP CONDUIT RISER GRIP SINGLE WEAVE SPLIT MESH ROD CLOSING CABLE DIA 1.25 - 1.49 CONDUIT DIA 2"
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?