US Motors 111900W Fire Pump Motor, 405TS FRME, 3560 RPM, 150 HP, 380V/460V
US Motors FF150E1CS
SKU EMB-FF150E1CS
US Motors' 111900W fire pump motor with 405TS FRME, 3560 RPM, 150 HP, rated for 380V/460V and made for fire pump applications per NFPA 20 where contaminants are minimal. Check out more US Motors products at HomElectrical now!
Image may not depict product actual color, inclusions or accessories
US Motors' 111900W fire pump motor with 405TS FRME, 3560 RPM, 150 HP, rated for 380V/460V and made for fire pump applications per NFPA 20 where contaminants are minimal. Check out more US Motors products at HomElectrical now!
- Motor Enclosure: ODP.
- HP: 150.
- Kilowatts: 111.9.
- Poles: 2.
- Number of Speeds: 1.
- RPM: 2960/3560.
- Hertz: 50/60.
- Volts: 380/460.
- FRME: 405.
- Shaft Code: TS.
- Mounting: Horz-Footed.
- Motor Type: FR.
- Bearing: 6212-2Z-J.
- Special application.
- Three phase open dripproof (ODP).
- Fire pump motors.
- Class F Insulation, Class B Rise At Service Factor.
- Rolled Steel Frame 250-320, Cast Iron Frame 360-440.
- Aluminum End Shields 250, Cast Iron End Shields 280-440.
- Premasked Mylar Nameplate 250-320, Stainless Steel 360-440 Frame.
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Larger.
- Double Shielded Bearings 250-400, Open On 440 Frame.
- Lifting Provisions 210 Frame & Larger.
- Suitable For Wye-Delta Start 250 Frame & Larger.
- Dual Voltage Ratings Suitable For Part Winding Start (PWS) On Low Voltage.
- 230/460 & 575 Volt Ratings Comply With NRCan Standards.
- 230/460V Ratings Dual Plated For 190/380V 50 Hertz, Next Lower Horsepower.
- Oversized Connection Diagram.
- cUL/UL Listed.
Similar HVAC Fan Motor Products
US Motors FF150E1CS Description
- Motor Enclosure: ODP.
- HP: 150.
- Kilowatts: 111.9.
- Poles: 2.
- Number of Speeds: 1.
- RPM: 2960/3560.
- Hertz: 50/60.
- Volts: 380/460.
- FRME: 405.
- Shaft Code: TS.
- Mounting: Horz-Footed.
- Motor Type: FR.
- Bearing: 6212-2Z-J.
- Special application.
- Three phase open dripproof (ODP).
- Fire pump motors.
- Class F Insulation, Class B Rise At Service Factor.
- Rolled Steel Frame 250-320, Cast Iron Frame 360-440.
- Aluminum End Shields 250, Cast Iron End Shields 280-440.
- Premasked Mylar Nameplate 250-320, Stainless Steel 360-440 Frame.
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Larger.
- Double Shielded Bearings 250-400, Open On 440 Frame.
- Lifting Provisions 210 Frame & Larger.
- Suitable For Wye-Delta Start 250 Frame & Larger.
- Dual Voltage Ratings Suitable For Part Winding Start (PWS) On Low Voltage.
- 230/460 & 575 Volt Ratings Comply With NRCan Standards.
- 230/460V Ratings Dual Plated For 190/380V 50 Hertz, Next Lower Horsepower.
- Oversized Connection Diagram.
- cUL/UL Listed.
Similar HVAC Fan Motor Products
Free Shipping
$10,311.40Each
Ships between 01/19/2026 - 01/21/2026
Product Specifications
| Part Number | FF150E1CS |
| Certificate | cUL/UL Listed |
| Electrical Phase | 3 Ph |
| Horsepower | 150 |
| Input Frequency | 60 Hz |
| Maximum Voltage | 380V/460V |
| RPM | 3560 |
| Product Dimensions | 31-in X 17.88-in X 18.78-in |
| Weight | 763.00-lb |
| UPC | 786382026301 |
Manufacturer Description
150 & 125 HP, 3560 & 2960 RPM, FF150E1CS, 460 & 380 V, 60 & 50 HZ, 405TS
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 111900W fire pump motor with 405TS FRME, 3560 RPM, 150 HP, rated for 380V/460V and made for fire pump applications per NFPA 20 where contaminants are minimal. Check out more US Motors products at HomElectrical now!
Free Shipping
$10,311.40Each
Ships between 01/19/2026 - 01/21/2026
Similar HVAC Fan Motor Products
US Motors FF150E1CS Description
- Motor Enclosure: ODP.
- HP: 150.
- Kilowatts: 111.9.
- Poles: 2.
- Number of Speeds: 1.
- RPM: 2960/3560.
- Hertz: 50/60.
- Volts: 380/460.
- FRME: 405.
- Shaft Code: TS.
- Mounting: Horz-Footed.
- Motor Type: FR.
- Bearing: 6212-2Z-J.
- Special application.
- Three phase open dripproof (ODP).
- Fire pump motors.
- Class F Insulation, Class B Rise At Service Factor.
- Rolled Steel Frame 250-320, Cast Iron Frame 360-440.
- Aluminum End Shields 250, Cast Iron End Shields 280-440.
- Premasked Mylar Nameplate 250-320, Stainless Steel 360-440 Frame.
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Larger.
- Double Shielded Bearings 250-400, Open On 440 Frame.
- Lifting Provisions 210 Frame & Larger.
- Suitable For Wye-Delta Start 250 Frame & Larger.
- Dual Voltage Ratings Suitable For Part Winding Start (PWS) On Low Voltage.
- 230/460 & 575 Volt Ratings Comply With NRCan Standards.
- 230/460V Ratings Dual Plated For 190/380V 50 Hertz, Next Lower Horsepower.
- Oversized Connection Diagram.
- cUL/UL Listed.
Product Specifications
| Part Number | FF150E1CS |
| Certificate | cUL/UL Listed |
| Electrical Phase | 3 Ph |
| Horsepower | 150 |
| Input Frequency | 60 Hz |
| Maximum Voltage | 380V/460V |
| RPM | 3560 |
| Product Dimensions | 31-in X 17.88-in X 18.78-in |
| Weight | 763.00-lb |
| UPC | 786382026301 |
Manufacturer Description
150 & 125 HP, 3560 & 2960 RPM, FF150E1CS, 460 & 380 V, 60 & 50 HZ, 405TS
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?