US Motors 29800W Elevator Motor, 160LCS FRME, 3475 RPM, 40 HP, 60 Hz, 575V
US Motors E40S1GZ
SKU EMB-E40S1GZ
US Motors' 29800W elevator motor with 160LCS FRME, 3475 RPM, 40 HP, rated for 575V and suitable for use in elevators in low rise buildings using Allweiler or IMO pumps. Explore more US Motors products at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
US Motors' 29800W elevator motor with 160LCS FRME, 3475 RPM, 40 HP, rated for 575V and suitable for use in elevators in low rise buildings using Allweiler or IMO pumps. Explore more US Motors products at HomElectrical today!
- Motor Enclosure: DP.
- HP: 40.
- Kilowatts: 29.8.
- Poles: 2.
- Number of Speeds: 1.
- RPM: 3475.
- Hertz: 60.
- Volts: 575.
- FRME: 160.
- Shaft Code: LCS.
- Mounting: Horz-Footed.
- Motor Type: IMH.
- Special application.
- Three phase.
- Submersible elevator motors.
- Z-flange & L32 flange.
- Class F Insulation.
- Zinc Plated Frame, 32 MM Shaft, Lifting Provisions On Brackets.
- Stainless Steel Nameplate On Motor & Mylar For Wall Mount.
- 70 C Thermostat Located On Motor Frame.
- Single Ball Bearing Design To Fit Most ALLWEILER & IMO Sub.Pumps.
- 112-in External Leads (Butt Splices At Approximate12-in & 47-in From Housing).
- Suitable for Wye-Delta Starting.
- Intermittent Duty (Rated 80 Starts/Hour In 50 C Oil or 120 Starts/Hour In 40 C Oil).
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
US Motors E40S1GZ Description
- Motor Enclosure: DP.
- HP: 40.
- Kilowatts: 29.8.
- Poles: 2.
- Number of Speeds: 1.
- RPM: 3475.
- Hertz: 60.
- Volts: 575.
- FRME: 160.
- Shaft Code: LCS.
- Mounting: Horz-Footed.
- Motor Type: IMH.
- Special application.
- Three phase.
- Submersible elevator motors.
- Z-flange & L32 flange.
- Class F Insulation.
- Zinc Plated Frame, 32 MM Shaft, Lifting Provisions On Brackets.
- Stainless Steel Nameplate On Motor & Mylar For Wall Mount.
- 70 C Thermostat Located On Motor Frame.
- Single Ball Bearing Design To Fit Most ALLWEILER & IMO Sub.Pumps.
- 112-in External Leads (Butt Splices At Approximate12-in & 47-in From Housing).
- Suitable for Wye-Delta Starting.
- Intermittent Duty (Rated 80 Starts/Hour In 50 C Oil or 120 Starts/Hour In 40 C Oil).
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
Free Shipping
$1,749.95Each
Ships between 02/03/2026 - 02/10/2026
Product Specifications
| Part Number | E40S1GZ |
| Electrical Phase | 3 Ph |
| Horsepower | 40 |
| Input Frequency | 60 Hz |
| RPM | 3475 |
| Product Dimensions | 17.44-in X 11.81-in X 14.37-in |
| Weight | 142.00-lb |
| UPC | 786382024819 |
Manufacturer Description
40 HP, 3475 RPM, E40S1GZ, 575 V, 60 HZ, 160LCS
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 29800W elevator motor with 160LCS FRME, 3475 RPM, 40 HP, rated for 575V and suitable for use in elevators in low rise buildings using Allweiler or IMO pumps. Explore more US Motors products at HomElectrical today!
Free Shipping
$1,749.95Each
Ships between 02/03/2026 - 02/10/2026
Similar HVAC Fan Motor Products
US Motors E40S1GZ Description
- Motor Enclosure: DP.
- HP: 40.
- Kilowatts: 29.8.
- Poles: 2.
- Number of Speeds: 1.
- RPM: 3475.
- Hertz: 60.
- Volts: 575.
- FRME: 160.
- Shaft Code: LCS.
- Mounting: Horz-Footed.
- Motor Type: IMH.
- Special application.
- Three phase.
- Submersible elevator motors.
- Z-flange & L32 flange.
- Class F Insulation.
- Zinc Plated Frame, 32 MM Shaft, Lifting Provisions On Brackets.
- Stainless Steel Nameplate On Motor & Mylar For Wall Mount.
- 70 C Thermostat Located On Motor Frame.
- Single Ball Bearing Design To Fit Most ALLWEILER & IMO Sub.Pumps.
- 112-in External Leads (Butt Splices At Approximate12-in & 47-in From Housing).
- Suitable for Wye-Delta Starting.
- Intermittent Duty (Rated 80 Starts/Hour In 50 C Oil or 120 Starts/Hour In 40 C Oil).
- cUL/UL Listed, CSA US.
Product Specifications
| Part Number | E40S1GZ |
| Electrical Phase | 3 Ph |
| Horsepower | 40 |
| Input Frequency | 60 Hz |
| RPM | 3475 |
| Product Dimensions | 17.44-in X 11.81-in X 14.37-in |
| Weight | 142.00-lb |
| UPC | 786382024819 |
Manufacturer Description
40 HP, 3475 RPM, E40S1GZ, 575 V, 60 HZ, 160LCS
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?