HomElectrical.com Lighting & Electrical Supply Superstore

US Motors 37300W Corro-Duty Motor, 326TC, 1780 RPM, 50 HP, 50/60 Hz, 380V/460V

US Motors C50P2FCR
SKU EMB-C50P2FCR
US Motors' 37300W Corro-Duty motor has a 326TC FRME, 1780 RPM, 50 HP, rated for 460V & 380V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Browse more at HomElectrical today!
US Motors 37300W Corro-Duty Motor, 326TC, 1780 RPM, 50 HP, 50/60 Hz, 380V/460V

Image may not depict product actual color, inclusions or accessories

US Motors' 37300W Corro-Duty motor has a 326TC FRME, 1780 RPM, 50 HP, rated for 460V & 380V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Browse more at HomElectrical today!
  • Motor Enclosure: TEFC.
  • HP: 50.
  • Kilowatts: 37.3.
  • Poles: 4.
  • Number of Speeds: 1.
  • RPM: 1465/1780.
  • Hertz: 50/60.
  • Volts: 380/460.
  • FRME: 326.
  • Shaft Code: TC.
  • Mounting: Horz-Footless.
  • Motor Type: TCEF.
  • Bearing: 6311-J/C3.
  • Rotation: Dual.
  • General purpose.
  • Three phase totally enclosed fan cooled (TEFC).
  • CORRO-DUTY.
  • Premium efficient.
  • Vertical C Face.
  • Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
  • All Cast Iron Construction (Steel Frame On 140 Frame).
  • Corrosion Resistant Mill & Chemical Duty Paint.
  • Stainless Steel Nameplate.
  • Shaft Slinger On Both Ends For IP54 Protection.
  • Regreasable Bearings 140 Frame & Up, Lifting Provisions 180 Frame & Up.
  • 40C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
  • 50 Hz rated at 190/380V (140-250 Frame) or 380V (280 Frame & Larger).
  • 1.15 Service Factor @ 60 Hz.
  • Special Balance (< 0.08 In/Sec Vibration).
  • Open Bearings 180-447 (Double Shielded Bearings on 140 Frame).
  • Steel Canopy Cap/Drip Cover (Cast Iron on 140 Frame).
  • Cast Iron Inner Bearing Caps (180 Frame & Larger).
  • Condensation Drain With Threaded Brass Breather Plug.
  • Oversized Cast Iron Conduit Box - 1 Size Larger Than NEMA Standard.
  • Zinc Plated Hardware.
  • cUL/UL Listed, CSA US.

Similar HVAC Fan Motor Products

US Motors C50P2FCR Description

  • Motor Enclosure: TEFC.
  • HP: 50.
  • Kilowatts: 37.3.
  • Poles: 4.
  • Number of Speeds: 1.
  • RPM: 1465/1780.
  • Hertz: 50/60.
  • Volts: 380/460.
  • FRME: 326.
  • Shaft Code: TC.
  • Mounting: Horz-Footless.
  • Motor Type: TCEF.
  • Bearing: 6311-J/C3.
  • Rotation: Dual.
  • General purpose.
  • Three phase totally enclosed fan cooled (TEFC).
  • CORRO-DUTY.
  • Premium efficient.
  • Vertical C Face.
  • Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
  • All Cast Iron Construction (Steel Frame On 140 Frame).
  • Corrosion Resistant Mill & Chemical Duty Paint.
  • Stainless Steel Nameplate.
  • Shaft Slinger On Both Ends For IP54 Protection.
  • Regreasable Bearings 140 Frame & Up, Lifting Provisions 180 Frame & Up.
  • 40C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
  • 50 Hz rated at 190/380V (140-250 Frame) or 380V (280 Frame & Larger).
  • 1.15 Service Factor @ 60 Hz.
  • Special Balance (< 0.08 In/Sec Vibration).
  • Open Bearings 180-447 (Double Shielded Bearings on 140 Frame).
  • Steel Canopy Cap/Drip Cover (Cast Iron on 140 Frame).
  • Cast Iron Inner Bearing Caps (180 Frame & Larger).
  • Condensation Drain With Threaded Brass Breather Plug.
  • Oversized Cast Iron Conduit Box - 1 Size Larger Than NEMA Standard.
  • Zinc Plated Hardware.
  • cUL/UL Listed, CSA US.

Similar HVAC Fan Motor Products

Free Shipping
$4,852.38Each

Usually Ships 2-4 Weeks

US Motors
Visit The US Motors Store
See more US Motors Fan & Blower

Product Specifications

Part NumberC50P2FCR
Electrical Phase3 Ph
Horsepower50
Input Frequency60 Hz
Maximum Voltage380V/460V
RPM1780
Product Dimensions32.63-in X 16.75-in X 22-in
Weight625.00-lb
UPC786382107352

Shop Top 100 HVAC System & Supply Products.

View other HVAC Fan Motor Best Sellers.

Manufacturer Description

50 HP, 1780 & 1465 RPM, C50P2FCR, 460 & 380 V, 60 & 50 HZ, 326TC
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 37300W Corro-Duty motor has a 326TC FRME, 1780 RPM, 50 HP, rated for 460V & 380V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Browse more at HomElectrical today!
US Motors 37300W Corro-Duty Motor, 326TC, 1780 RPM, 50 HP, 50/60 Hz, 380V/460V
Free Shipping
$4,852.38Each

Usually Ships 2-4 Weeks

Similar HVAC Fan Motor Products

US Motors C50P2FCR Description

  • Motor Enclosure: TEFC.
  • HP: 50.
  • Kilowatts: 37.3.
  • Poles: 4.
  • Number of Speeds: 1.
  • RPM: 1465/1780.
  • Hertz: 50/60.
  • Volts: 380/460.
  • FRME: 326.
  • Shaft Code: TC.
  • Mounting: Horz-Footless.
  • Motor Type: TCEF.
  • Bearing: 6311-J/C3.
  • Rotation: Dual.
  • General purpose.
  • Three phase totally enclosed fan cooled (TEFC).
  • CORRO-DUTY.
  • Premium efficient.
  • Vertical C Face.
  • Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
  • All Cast Iron Construction (Steel Frame On 140 Frame).
  • Corrosion Resistant Mill & Chemical Duty Paint.
  • Stainless Steel Nameplate.
  • Shaft Slinger On Both Ends For IP54 Protection.
  • Regreasable Bearings 140 Frame & Up, Lifting Provisions 180 Frame & Up.
  • 40C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
  • 50 Hz rated at 190/380V (140-250 Frame) or 380V (280 Frame & Larger).
  • 1.15 Service Factor @ 60 Hz.
  • Special Balance (< 0.08 In/Sec Vibration).
  • Open Bearings 180-447 (Double Shielded Bearings on 140 Frame).
  • Steel Canopy Cap/Drip Cover (Cast Iron on 140 Frame).
  • Cast Iron Inner Bearing Caps (180 Frame & Larger).
  • Condensation Drain With Threaded Brass Breather Plug.
  • Oversized Cast Iron Conduit Box - 1 Size Larger Than NEMA Standard.
  • Zinc Plated Hardware.
  • cUL/UL Listed, CSA US.

Product Specifications

US Motors
Visit The US Motors Store
Part NumberC50P2FCR
Electrical Phase3 Ph
Horsepower50
Input Frequency60 Hz
Maximum Voltage380V/460V
RPM1780
Product Dimensions32.63-in X 16.75-in X 22-in
Weight625.00-lb
UPC786382107352

Shop Top 100 HVAC System & Supply Products.

View other HVAC Fan Motor Best Sellers.

Manufacturer Description

50 HP, 1780 & 1465 RPM, C50P2FCR, 460 & 380 V, 60 & 50 HZ, 326TC
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.

Product Questions & Answers

Customer Reviews

0 out of 5
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Write A Review
Need Assistance?

Never Stop Saving!

With HomElectrical, you are not just buying a product, you are buying a solution. Our goal is to help you make the most educated choice possible with the highest quality customer service. Whether it is about your electrical supplies, LED lighting, or HVAC projects, we have the knowledge and expertise to be your supply house. HomElectrical promotes growth and embraces change to save the earth and your wallet.