US Motors' 74600W Corro-Duty motor has a 405TSC FRME, 1780 RPM, 100 HP, rated for 460V & 380V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Explore more at HomElectrical today!
- Motor Enclosure: TEFC.
- HP: 100.
- Kilowatts: 74.6.
- Poles: 4.
- Number of Speeds: 1.
- RPM: 1475/1780.
- Hertz: 50/60.
- Volts: 380/460.
- FRME: 405.
- Shaft Code: TSC.
- Mounting: Horz-Footless.
- Motor Type: TCEF.
- Bearing: 6316-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- CORRO-DUTY.
- Premium efficient.
- Vertical C Face.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction (Steel Frame On 140 Frame).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate.
- Shaft Slinger On Both Ends For IP54 Protection.
- Regreasable Bearings 140 Frame & Up, Lifting Provisions 180 Frame & Up.
- 40C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- 50 Hz rated at 190/380V (140-250 Frame) or 380V (280 Frame & Larger).
- 1.15 Service Factor @ 60 Hz.
- Special Balance (< 0.08 In/Sec Vibration).
- Open Bearings 180-447 (Double Shielded Bearings on 140 Frame).
- Steel Canopy Cap/Drip Cover (Cast Iron on 140 Frame).
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- Condensation Drain With Threaded Brass Breather Plug.
- Oversized Cast Iron Conduit Box - 1 Size Larger Than NEMA Standard.
- Zinc Plated Hardware.
cUL/UL Listed, CSA US.- Dimensions: 37.63-in (L) x 20.88-in (W) x 29-in (H).