Private Label GXU2RBEM Exit Sign

Comparable Exit Sign Products

Private Label GXEDU1RCA-EM Edge Lit LED Exit Sign w/ Aluminum Housing, Red Letter GP-GXEDU1RCAEM

$68.99Each

Private Label GXEDU1RCW-EM Edge Lit LED Exit Sign w/ White Housing, Red Letter GP-GXEDU1RCWEM

$68.99Each

Private Label GXU2RW-EM White LED Exit Sign w/ Red Letter & Battery Backup GP-GXU2RWEM

$14.99Each

MaxLite MLEU2RWEM 4 Watts Red LED Exit Sign with Battery Backup Unit MXL-MLEU2RWEM

$40.80Each

Private Label GXREDU2GCA-EM Edge Lit Double Face Recessed Exit Sign w/ Aluminum Housing, Green Letter GP-GXREDU2GCAEM

$94.99Each

Private Label GXU2RBEM Description

• Universal Mount LED Exit
• Available colors - Housing: Black or White
• Lettering Colors also available: Red or Green
• Slim and low profile LED exit sign provides a crisp, clean appearance
• Available single or double faced
• Ideally suited for use in retail, office, education, hospitality/lodging, institutional and multiple dwelling applications
• Completely self contained, approved for damp locations
• Fully automatic operation, Battery backup
• Compact, low-profile design in neutral finish

Product Specification

Manufacturer Description

• Automatic low-voltage disconnect (LVD)
• 120/277 VAC operation
• Injection-molded, V-O flame retardant, high impact,
  thermoplastic housing
• Charge rate/power LED indicator light
• Energy consumption of less than 4 watts for red letters and
  less than 2 watts for green letters
• LED lamp life of 25+ years
• UL listed for damp location
• Universal mounting canopy for side or top installation
• Standard AC Only Units available. AC only exit signs do NOT have
  battery backup. AC only units are designed for use in a building that
  has an alternative backup power source, sunch as a generator, that
  provides power to the entire building in the event of a power outage
  and operates from primary building power source under normal conditions
• Ni-Cad battery power on emergency (EM) units. The Ni-Cad
  batteries charge during normal operation. When a power failure
  in the building occurs, the electronic circuit senses the change
  and automatically switches to the backup batter power. After the
  primary power to the building is restored the unit switches back to
  normal mode and recharges the batteries. Allow 24-hours to fully
  charge batteries after installation. A push to test switch is located
  on the lower side of the exit sign. When the test switch is pushed
  power is interrupted to the exit sign and the batteries switch on.
  During the test the exit sign should remain on with the batteries
  powering the exit sign.
• On the Dual Circuit units, a second circuit allows the use of the
  outside sources of energy in emergencies as from generators.
  One circuit then is wired to the main power source of the building
  and the other ciruit can be wired directly to an alternative power
  source. This configuration eliminates the need for an internal
  battery backup and reduces long-term maintenance of the exit sign.

Private Label GXU2RBEM Reviews

Product Question