Eaton Wiring 600W Occupancy Sensor & Dimmer, Incandescent, Single-Pole, White
Eaton Wiring OS106D1-W
SKU ETW-OS106D1W
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Image may not depict product actual color, inclusions or accessories
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Eaton Wiring 600W Occupancy Sensor & Dimmer, Incandescent, Single-Pole, White features:
- Full-range preset dimming control available with DIM/BRIGHT bar.
- Preset & light level change is shown with the horizontal row of green LEDs.
- Compatible with popular load types: halogen, magnetic low-voltage, & incandescent.
- Green LED light shows load status, provides light in dark, & blinks during motion detection.
- Replaces a standard light switch.
- Provides a 180 degree field of view & 1000 square feet of motion coverage.
- Has selectable time delay feature for lights to remain ON after room is vacated.
- Reverse mode allows lights to stay OFF in a room when motion is detected.
- Mid-size decora wall plate is included with sensor.
- Sensor has a bypass feature to allow the sensor to perform as a traditional switch.
- Neutral is required for device installation.
- Has electrostatic discharge protection.
Similar In-Wall Occupancy & Motion Sensor Products
Eaton Wiring OS106D1-W Description
Eaton Wiring 600W Occupancy Sensor & Dimmer, Incandescent, Single-Pole, White features:
- Full-range preset dimming control available with DIM/BRIGHT bar.
- Preset & light level change is shown with the horizontal row of green LEDs.
- Compatible with popular load types: halogen, magnetic low-voltage, & incandescent.
- Green LED light shows load status, provides light in dark, & blinks during motion detection.
- Replaces a standard light switch.
- Provides a 180 degree field of view & 1000 square feet of motion coverage.
- Has selectable time delay feature for lights to remain ON after room is vacated.
- Reverse mode allows lights to stay OFF in a room when motion is detected.
- Mid-size decora wall plate is included with sensor.
- Sensor has a bypass feature to allow the sensor to perform as a traditional switch.
- Neutral is required for device installation.
- Has electrostatic discharge protection.
Similar In-Wall Occupancy & Motion Sensor Products
Color / Finish
White
sku ETW-OS106D1W
Free Shipping Eligible
Product Specifications
| Part Number | OS106D1-W |
| Certificate | cUL/UL Listed |
| Color / Finish | White |
| Maximum Voltage | 120V |
| Wattage | 600W |
| Product Dimensions | 3.31-in X 2.88-in X 5.44-in |
| Weight | 5.00-lb |
| UPC | 032664711084 |
Manufacturer Description
Occ SW,Dim,SP,600W,INC,NLight,WH
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Color / Finish
White
sku ETW-OS106D1W
Free Shipping Eligible
Similar In-Wall Occupancy & Motion Sensor Products
Eaton Wiring OS106D1-W Description
Eaton Wiring 600W Occupancy Sensor & Dimmer, Incandescent, Single-Pole, White features:
- Full-range preset dimming control available with DIM/BRIGHT bar.
- Preset & light level change is shown with the horizontal row of green LEDs.
- Compatible with popular load types: halogen, magnetic low-voltage, & incandescent.
- Green LED light shows load status, provides light in dark, & blinks during motion detection.
- Replaces a standard light switch.
- Provides a 180 degree field of view & 1000 square feet of motion coverage.
- Has selectable time delay feature for lights to remain ON after room is vacated.
- Reverse mode allows lights to stay OFF in a room when motion is detected.
- Mid-size decora wall plate is included with sensor.
- Sensor has a bypass feature to allow the sensor to perform as a traditional switch.
- Neutral is required for device installation.
- Has electrostatic discharge protection.
Product Specifications
| Part Number | OS106D1-W |
| Certificate | cUL/UL Listed |
| Color / Finish | White |
| Maximum Voltage | 120V |
| Wattage | 600W |
| Product Dimensions | 3.31-in X 2.88-in X 5.44-in |
| Weight | 5.00-lb |
| UPC | 032664711084 |
Manufacturer Description
Occ SW,Dim,SP,600W,INC,NLight,WH
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?