Stelpro 1350 Watts at 240 V SCAS Sloped Architectural Baseboard
Stelpro SCAS27132W
SKU STP-SCAS27132W
Image may not depict product actual color, inclusions or accessories
STELPRO 240 V SCAS Sloped Architectural Baseboard 1350W
- Epoxy-polyester powdercoat.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
- Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
- Single Pole.
- Double Pole.
- Low voltage relay kit installed in the left or right junction box (optional) (sold separately).
- Surface Mounted.
- Wall or floor mounted with or without pedestal kit (optional) (sold separately).
- Wiring compartments at both ends of unit.
- Black sections (custom lengths) and accessories are available for a continuous look (optional) (sold separately)
- Joiner Strip.
- Inside Corner.
- Outside Corner.
- Clean Back.
- Disconnect Switch
- Right Side.
- Left Side.
- 3 Year Warranty.
- CSA US.
Similar Baseboard Heater - Up to 150 sq. ft. Products
Stelpro SCAS27132W Description
STELPRO 240 V SCAS Sloped Architectural Baseboard 1350W
- Epoxy-polyester powdercoat.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
- Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
- Single Pole.
- Double Pole.
- Low voltage relay kit installed in the left or right junction box (optional) (sold separately).
- Surface Mounted.
- Wall or floor mounted with or without pedestal kit (optional) (sold separately).
- Wiring compartments at both ends of unit.
- Black sections (custom lengths) and accessories are available for a continuous look (optional) (sold separately)
- Joiner Strip.
- Inside Corner.
- Outside Corner.
- Clean Back.
- Disconnect Switch
- Right Side.
- Left Side.
- 3 Year Warranty.
- CSA US.
Similar Baseboard Heater - Up to 150 sq. ft. Products
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 150 sq. ft.
Product Specifications
| Part Number | SCAS27132W |
| Color / Finish | White |
| Heating Technology | Convection |
| Maximum Voltage | 240V |
| Room Size | 150 Sq Ft |
| Warranty | 10 Yr |
| Wattage | 1350W |
| Weight | 37.00-lb |
| UPC | 626296144473 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 150 sq. ft.
Similar Baseboard Heater - Up to 150 sq. ft. Products
Stelpro SCAS27132W Description
STELPRO 240 V SCAS Sloped Architectural Baseboard 1350W
- Epoxy-polyester powdercoat.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
- Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
- Single Pole.
- Double Pole.
- Low voltage relay kit installed in the left or right junction box (optional) (sold separately).
- Surface Mounted.
- Wall or floor mounted with or without pedestal kit (optional) (sold separately).
- Wiring compartments at both ends of unit.
- Black sections (custom lengths) and accessories are available for a continuous look (optional) (sold separately)
- Joiner Strip.
- Inside Corner.
- Outside Corner.
- Clean Back.
- Disconnect Switch
- Right Side.
- Left Side.
- 3 Year Warranty.
- CSA US.
Product Specifications
| Part Number | SCAS27132W |
| Color / Finish | White |
| Heating Technology | Convection |
| Maximum Voltage | 240V |
| Room Size | 150 Sq Ft |
| Warranty | 10 Yr |
| Wattage | 1350W |
| Weight | 37.00-lb |
| UPC | 626296144473 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?