Shop Tube Bender

51608

Designed for 1/2-in EMT Features 10, 22, 30, 45, and 60 degree markings Cast markings allow for fast, easy conduit...

51610

Iron material Designed for 1-in EMT or 3/4-in rigid and IMC conduit Includes 10, 22.5, 30, 45, 60 degree markings...

51609

Cast ductile iron material Cast markings and symbols make for fast, easy conduit alignment to make all bend types Includes...

51605

Cast ductile iron material Designed to bend 1-Inch EMT, 3/4-Inch Rigid and 3/4-Inch IMC conduit Comes with head, handle, and...

51603

Cast ductile iron material Includes head, handle, and angle setter Angle setter intended for use on 10, 22.5, 30, and...

51604

Cast ductile iron material Includes head, handle, and angle setter Includes markings for 10, 22.5, 30, 45, 60 degrees and...

51606

Easy handling aluminum head is reinforced for added strength Interior clamp securely holds conduit while cutting with hacksaw Markings for...

51607

Includes head, handle, and angle setter Suitable for 10, 22.5, 30, 45, and 60 degree bends and corresponding offset multipliers...

51611

Creates a hard stop for fast and accurate bending Movable bend angles: 10, 22.5, 30, and 45 degrees Conduit insets...

51612

Produces a hard stop for fast, accurate bending Movable bend angles: 10, 22.5, 30, and 45 degrees Conduit insets into...

51613

Creates a hard stop for fast accurate bending Four movable bend angles: 10, 22.5, 30, 45 degree Align the angle...

78403

Smooth dowels only Made in the USA Original and Pro 3-Piece Bulldog set not included Designed for use with the...

78402

Smooth dowels only Made in the USA Pup Pro 2-Piece Bulldog Set not included Designed for use with the 2-Piece...

78650

1000MCM Capacity and smaller 3-Piece set: 26in Standard Handle, 26in Pro-Handle, 18in Adaptor Bar Slim handles for easy access to...

57090

Compatible with 1/2-in, 3/4-in, 1-in and 1-1/4-in conduit sizes Make accurate 90 degree bends on variable and uneven surfaces...

57123

Bends EMT sizes 1/2-in, 3/4-in and 1-in with common 10°, 22°, 30°, 45°, 60° and 90° angle demarcations Integrated...

51006

Tubing Bender Fits 6, 8, 10mm OD TubingWorks with Soft Copper, Aluminum, Thin Wall Steel, and Thin Wall Stainless Steel...

52311

Size: 1/2-inInsert the pipe spring into the pipe and bend across your kneePermanently bend Schedule 40 PVC pipe up to...

52312

Size: 3/4-inInsert the pipe spring into the pipe and bend across your kneePermanently bend Schedule 40 PVC pipe up to...

52313

Size: 1-inInsert the pipe spring into the pipe and bend across your kneePermanently bend Schedule 40 PVC pipe up to...

52314

Size: 1-1/4-inInsert the pipe spring into the pipe and bend across your kneePermanently bend Schedule 40 PVC pipe up to...

58100

Rack-A-Tiers 1-in Pipe Viper - PVC Spring Bender, No Heat Required features: To be used for Schedule 40 PVC. Not...

364-FHA-04

This lever type tube bender features an open side type which slips over the tube at any point. This tool...

364-FHA-06

This tube bender has open side which slips over the tube at any point. This makes a smooth tight radius...

364-FHA-08

This tube bender features an open side type which slips over the tube at any point. This tool make smooth...

364-FHA-12

This lever type tube bender has open an open side type. This tool also makes smooth tight radius bends up...

364-FHB04

Features a pantented swivel handle that can be repositioned midway through a bend when both handles begin to meet. This...

364-FHB06

This wivel handle rub bender has patented series swivel handle that can be repositioned midway through a bend when both...

364-FHB08

This swivel handle tube bender can be repositioned midway through a bend when both handles begin to meet. This tool...

368-FH

This triple head bender features calibrated marking for making accurate left-hand, right and offset bends. The 90 degree start for...