Shop Tape Light Accessory

DI-1810

Use with RGB tape light and linear LED tape or strip light Power failure memory Environment: Indoor/damp Operating temperature: -4...

DI-TB-CONN-TTT-1

White Finish8mm; Tape-To-TapeClear plastic constructionFast and easy installationSmall form-factor...

DI-CPCH-RC-BA

Secure channel to flat surface and adjust to desired angle with this pressure-fit clip Adds 0.74-in height to channel Includes:...

DI-TB12-90-TTT-5

Clear Finish12mm; Tape-To-Tape; 90 Degree CornerClear plastic constructionFast and easy installationSmall form-factor...

DI-CPCH-UC-BA

Pack of 2 clips Accessory for SLIM MOUNTING Channels Comes in 3 colors Adds 0.12-in in height to channel Compatible...

DI-TB12-CONN-TTW-5

Accessory for tape lights, specifically recommended for Valent X tape lights.Tape-to-Wire connection via screw down.3M adhesive backing.12V-24V output.16 AWG -...

TL-3JUMP65-.5

IP65 Connectors included.Dimensions: 6-in (L) x 0.5-in (H)...

DI-CPEC-SL-1

End Cover Caps for Slim Channels only A set of end caps includes closed and notched open cap that can...

DI-CKT-3BX8

Avenue 24, Blaze and Fluid View Tape Light Accessories Wire lead allows for turns around tight corners Wire: UL 2464...

DI-TB12-CONN-TTT-5

Clear Finish12mm; Tape-To-TapeClear plastic constructionFast and easy installationSmall form-factor...

DI-TB8-60SPL-TTW-1

Terminal Block Splice Wire, Tape to Wire Connection Single 12-24VDC 12V - 5A, or 24V - 4A 16 AWG -...

MLINK-120-CONKITP

6-ft Power Connector Kit with straight 120V AC plug is accessory to Microlink 120VAC and Linkable Modular Bar Lights...

ST-POWSET-18

Length: 18-in Set includes cord, coupling and end cap Made for use with ST-2835 Series Striplights cUL/UL Listed...

DI-CPCH-UC-WH

Pack of 2 clips Accessory for SLIM MOUNTING Channels Comes in 3 colors Adds 0.12-in in height to channel Compatible...

DI-TB8-CONN-TTW-1

Screw Down, Tape to Wire Connection 8mm wide tape light 12-24VDC 12V - 5A, or 24V - 4A 16 AWG...

DI-TB8-6JPR-TTT-1

Terminal Block Jumper Cable, Tape to Tape Connection Single 12-24VDC 12V - 5A, or 24V - 4A 16 AWG -...

DI-CPEC-SLW-1

End Cover Caps for Slim Channels only A set of end caps includes closed and notched open cap that can...

TL-6SPL-HD

American Lighting In-Line Splice Connector for Trulux RGB+TW Series, 6-PIN features: In-Line splice connector for Trulux RGB+TW 6-PIN snap connector...

65487

Connector Kit Contains: (2) - 1ft bendable connectors (2) - 3ft bendable connectors (2) - 5ft bendable connectors (2) -...

TL-2JUMP24-HD

Tape-to-tape Jumper Linking Cable for Trulux tape lights 24 inch 10mm 2 PIN...

120-H3-CHAN2-3

With lens Mounting accessory for Hybrid 3 Linear Lights...

120-H3-CLIPS

Mounting clips for use with Hybrid 3 Linear Lights...

120-H3-CONKIT

Connection kit for use with Hybrid 3 Linear Lights 120V Includes end cap...

120-H3-JUMP.5

Length: 6 Inches 120V Includes connection sleeve assembly...

120-H3-JUMP3

Length: 3 Foot 120V Includes connection sleeve assembly...

120-H3-JUMP6

Length: 6 Foot 120V Includes connection sleeve assembly...

CNVS-ICON-2PIN

In-Line 2-Pin Jumper Wire connects two single color LED Light Sheets together Made for use with Single Color LED Light...

CNVS-ICON-3PIN

In-Line 3-Pin Jumper Wire connects two Selectable CCT LED Light Sheets together Made for use with Selectable CCT LED Light...

CNVS-ICON-5PIN

4 Pieces In-Line 4-Pin Jumper Wire connects two RGNW color LED Light Sheets together Made for use with RGBW LED...

INLINE-RGB-CTRL

5-6 Amp 20 AWG Simple Select RGB Controller Made for use with Trulux RGB Tape Lights...