Nuvo Lighting Mobili Collection

To install Nuvo’s Mobili Flush Mount Light, please hire a licensed electrician for the installation. The electrician will follow the steps from the Installation Guide that is provided with the fixture.

• Before beginning the installation, the electrician will turn off the power and gather all the equipment for the fixture.
• Then they will thread the mounting screws into the mounting bar and secure the mounting bar to the outlet box.
• Then the electrician will do the wiring. This includes connecting the wires from the fixture to the correct wires in the wall. This is important so the light works and there is not an electrical issue.
• Once the wiring is complete, the electrician will place the wires in the outlet box. Then they will install the light bulbs and check to see if the light works.

Yes, your vanity needs vanity lights. Vanity lights provide task lighting for you in the bathroom. This allows you to see what you are doing throughout the day, especially in the early mornings and night. Vanity lights also add to the decor and ambiance of your home. By having a light that looks appealing, vanity lights can draw you and guests back to that room.

To wire Nuvo’s Mobili Mini Pendant, consult with a licensed electrician. Below are steps they will follow to wire the pendant during the installation.

• Step 1: First the electrician will put the grounding screw into the mounting bar. Then they will wrap the ground wire from the fixture around the grounding screw. They will also connect the ground wire to the ground wire in the outlet box.
• Step 2: Then they will separate the wiring to help them for later.
• Step 3: Once they figure out the wires, they will take one set of the wires and put them evenly against a black wire and outlet box.
• Step 4: They will then fit a wire connector over the wires and screw the connector down. Once screwed down, they will try and pull the connector off. If they cannot take it off, they can move forward with the wiring. However, if it does come off, they will need re-do the steps.
• Step 5: Once that is completed, they will connect the wires from another group of to the white wire from the outlet box.
• They will need to ensure no wires are visible outside the wire connectors.