US Motors 149100W TEFC Corro-Duty Motor, 449T FRME, 1190 RPM, 200 HP, 460V
US Motors C200P3C
SKU EMB-C200P3C
US Motors' 149100W TEFC Corro-Duty motor has a 449T FRME, 1190 RPM, 200 HP, rated for 460V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Discover more at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
US Motors' 149100W TEFC Corro-Duty motor has a 449T FRME, 1190 RPM, 200 HP, rated for 460V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Discover more at HomElectrical today!
- Motor Enclosure: TEFC.
- HP: 200.
- Kilowatts: 149.1.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1190.
- Hertz: 60.
- Volts: 460.
- FRME: 449.
- Shaft Code: T.
- Mounting: Horz-Footed.
- Motor Type: TCE.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- CORRO-DUTY.
- NEMA Premium Efficient.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction (Steel Frame & Fan Cover On 140 Frame).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Precision Balance (< 0.08 In/Sec Vibration).
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up.
- Double Shielded Bearings 140-360, Open On 400-440.
- Oversized Conduit Box - 1 Size Larger Than NEMA Standard.
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- Field Convertible To F2 Mounting 180 Frame & Larger.
- Condensation Drains With Threaded Brass Breather Plugs.
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
US Motors C200P3C Description
- Motor Enclosure: TEFC.
- HP: 200.
- Kilowatts: 149.1.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1190.
- Hertz: 60.
- Volts: 460.
- FRME: 449.
- Shaft Code: T.
- Mounting: Horz-Footed.
- Motor Type: TCE.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- CORRO-DUTY.
- NEMA Premium Efficient.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction (Steel Frame & Fan Cover On 140 Frame).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Precision Balance (< 0.08 In/Sec Vibration).
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up.
- Double Shielded Bearings 140-360, Open On 400-440.
- Oversized Conduit Box - 1 Size Larger Than NEMA Standard.
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- Field Convertible To F2 Mounting 180 Frame & Larger.
- Condensation Drains With Threaded Brass Breather Plugs.
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
Free Shipping
$41,791.60Each
Usually Ships 2-4 Weeks
Product Specifications
| Part Number | C200P3C |
| Electrical Phase | 3 Ph |
| Horsepower | 200 |
| Maximum Voltage | 460V |
| RPM | 1190 |
| Product Dimensions | 55.13-in X 26.81-in X 24.06-in |
| Weight | 2,400.00-lb |
Manufacturer Description
200 HP, 1190 RPM, C200P3C, 460 V, 60 HZ, 449T
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 149100W TEFC Corro-Duty motor has a 449T FRME, 1190 RPM, 200 HP, rated for 460V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Discover more at HomElectrical today!
Free Shipping
$41,791.60Each
Usually Ships 2-4 Weeks
Similar HVAC Fan Motor Products
US Motors C200P3C Description
- Motor Enclosure: TEFC.
- HP: 200.
- Kilowatts: 149.1.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1190.
- Hertz: 60.
- Volts: 460.
- FRME: 449.
- Shaft Code: T.
- Mounting: Horz-Footed.
- Motor Type: TCE.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- CORRO-DUTY.
- NEMA Premium Efficient.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction (Steel Frame & Fan Cover On 140 Frame).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Precision Balance (< 0.08 In/Sec Vibration).
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up.
- Double Shielded Bearings 140-360, Open On 400-440.
- Oversized Conduit Box - 1 Size Larger Than NEMA Standard.
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- Field Convertible To F2 Mounting 180 Frame & Larger.
- Condensation Drains With Threaded Brass Breather Plugs.
- cUL/UL Listed, CSA US.
Product Specifications
| Part Number | C200P3C |
| Electrical Phase | 3 Ph |
| Horsepower | 200 |
| Maximum Voltage | 460V |
| RPM | 1190 |
| Product Dimensions | 55.13-in X 26.81-in X 24.06-in |
| Weight | 2,400.00-lb |
Manufacturer Description
200 HP, 1190 RPM, C200P3C, 460 V, 60 HZ, 449T
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?