Bosch Saw Blade & Electric Saw

Cut cleanly through wood when you use a quality electric saw from Bosch! Bosch offers miter saws, jig saws, table saws, and more. You can also choose from a wide variety of saw blades in various sizes and styles. Expand your toolbox with quality tools when you shop Bosch saw blades and electric saws at HomElectrical!

361-390 of 659 products

$72.29Each
HDG2
$46.49Each
HDG1

What is a miter saw used for?

A miter saw, or mitre saw, consists of a stationary, hinge-mounted blade used for making crosscuts. Since the hinge remains in one place, the saw blade drops down in a controlled motion, allowing you to make clean and consistent cuts. Miter saws often see use cutting wood trim and molding, but they can also work well for other woodworking projects.

A miter saw typically mounts the blade on a swing arm that can pivot to produce angled cuts. Depending on the type, it may make a miter cut or bevel cut.

  • A miter cut consists of an angled cut made across the width of the board. Miter cuts come down at a 90-degree angle to the board.
  • A bevel cut consists of an angled cut made through the thickness of the board instead of through the length or width. It changes the vertical angle, so the blade no longer comes down at a 90-degree angle.

While all miter saws can perform a miter cut, not all can perform a bevel cut. Not all miter saws can adjust to accommodate a bevel cut. A single bevel miter saw, also called a compound miter saw, only tilts in one direction, either to the left or the right, to provide a bevel cut. However, they may pivot left and right to provide a miter cut. They work best on projects that require few bevel cuts in opposing directions. A double bevel, or dual-bevel, miter saw can tilt to the left and the right to provide a bevel cut. This allows you to easily make bevel cuts without having to reposition.

What is the difference between a miter saw and a circular saw?

A miter saw remains stationary and the user pulls the blade down onto the wood they wish to cut. Due to its design, a miter saw offers a more precise, accurate cut and works well for cutting down long boards.

A circular saw functions as a handheld tool that the user pushes through the wood in order to cut. Circular saws offer more portability and work well for breaking down larger material.

A table saw consists of a rotary sawblade on a flat table that supports the materials its cutting. They work well for breaking down larger material into more manageable sizes. Table saws often see use making rip cuts in the wood, though they can also make cross cuts or dado cuts. A rip cut goes along the length of the board, with the grain of the wood, while a cross cut goes across the grain. A dado cut makes a groove or channel in the wood.

What is a reciprocating saw used for?

A reciprocating saw, also referred to as a Sawzall, consists of a handheld tool that features a horizontal blade and a trigger on the handle. The blade moves in a push-and-pull, or reciprocating, motion and remains exposed which allows it to work in tight spaces. They use interchangeable blades to accomplish tasks ranging from demolition to remodeling.

Bosch offers the 1-1/8-inch reciprocating saw which features innovative counterbalance technology and an anti-vibration handle. This helps reduce the vibration to about 1/3rd that of standard tools. It also comes equipped with a variable speed trigger to improve cutting control in various materials. Additionally, this tool features a constant response circuitry to maintain the desired speed for consistent performance under load.

What is a jig saw?

A jigsaw cuts using a rapid up-and-down motion. They work well cutting shapes and curves and may work with woods of varying thickness and density.

The Bosch jig saw GST18V-47N features an ergonomic and well-balanced barrel-grip design. This powerful 18V tool provides variable-speed control. It uses a dial to control the operating speed, delivering from 550 up to 2,700 no-load strokes per minute.

Why choose a Bosch saw?

Bosch saws include a wide variety of high-quality tools, including the Bosch miter saw GCM12SD. The GCM12SD is a 12 inch dual-bevel glide miter saw that features a smooth cutting motion, accurate performance, and a space-saving design of the Bosch-exclusive Axial Glide System. The Bosch-exclusive Axial Glide provides wider cross-cuts, enhanced alignment, and smooth glide for the entire life of the tool. Bosch boasts that the pre-aligned SquareLock fences help the saw maintain precision throughout its life.

Other benefits include:

  • Easy-to-read bevel and miter scales with detents at common angles
  • Large cutting capacity and easy-access upfront controls
  • Soft-grip ambidextrous handle and combination dust chute and vacuum adapter
  • Easy-to-access thumb actuated control for finer miter angle adjustments with push-button miter detent override located right up front

Bosch also offers a selection of other saws, including:

  • Reciprocating saws
  • Circular saws
  • Jig saws
  • Band saws
  • and much more!

Bosch saw blades include band saw blades, hole saw blades, jigsaw blades, and more.

Need Assistance?