Stelpro 4-ft 600W Sloped Architectural Baseboard Heater, Up To 75 Sq.Ft, 2048 BTU/H, 208V, Black

Stelpro SCAS12068BK
The Sloped Architecture Baseboard Heater from Stelpro's sleek design and sloped top prevents damage from being stepped on or used as a shelf make it the ideal choice for perimeter heating in schools, offices, and retail locations.
Discontinued
Stelpro 4-ft 600W Sloped Architectural Baseboard Heater, Up To 75 Sq.Ft, 2048 BTU/H, 208V, Black
Stelpro 4-ft 600W Sloped Architectural Baseboard Heater, Up ...
Replacement Product
Price$289.62$583.20
Sold ByEachEach
BrandStelproStelpro
MPNSCAS12068BKSCAS12068W
Color / FinishWhite
CompanySCAS Series Sloped Architectural BaseboardSCAS Series Sloped Architectural Baseboard
Heating TechnologyConvectionConvection
Height7-in
Length47.25-in
Maximum Voltage208V208V
Product categoryBaseboard Heater - Up to 50 sq. ft.Baseboard Heater - Up to 50 sq. ft.
Room Size150 Sq Ft150 Sq Ft
Sealed BatteryNo
Warranty3 Yrs10 Yr
Wattage600W600W
Width3-in

Stelpro SCAS12068BK Description

Stelpro 600W Sloped Architecture Baseboard, Low Density Unit, 208 V, Black features:

  • Epoxy-polyester powdercoat keeps unit looking new.
  • Durable 18-gauge steel cabinet and 16-gauge steel front panel.
  • Front air intake and top air discharge.
  • Thermal protection with automatic reset prevents fire hazard and overheating.
  • Full-length wireway.
  • Pencil-proof openings less than 1/4 in. prevents foreign objects from entering the unit.
  • Protective wire mesh available for front cover (optional).
  • Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
  • The element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
  • Wall thermostat (not included) – the use of an electronic thermostat is strongly recommended.
  • Built-in tamper-proof thermostat accessible without removing front grill, installed in the left junction box only (optional).
  • Low voltage relay kit installed in the left or right junction box (optional) installation.
  • Surface mounted.
  • Wall or floor mounted with or without pedestal kit (optional).
  • Wiring compartments at both ends of unit.
  • Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
  • Dimensions: 47.25"(L) x 7"(H) x 3"(W).
Need Assistance?