Stelpro 2-ft 600W High-Density Aluminum Baseboard Heater, 75 Sq.Ft, 2048 BTU/H, 208V, S.White

Stelpro Off White, 208V, 600W Architectural Baseboard Heater, Low Density Features:

• Epoxy polyester powdercoat or anodized aluminum finish.
• 4 3/8 in x 6/34 in.
• Solid 20-gauge steel cabinet and extremely resistant extruded aluminum front cover with a thickness equivalent to 10 gauge.
• Front air intake and top air discharge.
• Thermal protection with automatic reset.
• Full length wireway.
• Pencil proof openings of less than 1/4 in prevent foreign objects from entering the unit.
• Double tubular elements, stainless steel sheathed with boxed aluminum fins for improved heat dissipation; the elements are securely fastened at their centers, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
• Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
• Built-in tamper proof thermostat accessible without removing front grille, installed in the left or right junction box (optional) (sold seperately)
  • Single Pole .
  • Double Pole .
  .
• Low voltage relay kit  installed in the left or right junction box (optional) (sold seperately).
• Multiple integrated controls can be installed in the same baseboard.
• Surface mounted.
• Wall or floor mounted with or without pedestal kit (optional) (sold seperately)
  • Single Pedestal .
  • Double Pedestal .
  .
• Wiring compartments at both ends of unit.
• For a continuous look, custom blank sections with a simple attachment system are available
  • Inside Corner.
  • Outside Corner.
  • Joiner Strip.
  • Clean Back.
  • Air Filter.
  .
• Disconnect Switch
  • 120V-277V
    • Right Side.
    • Left Side.
    .
  • 600V
    • Right Side.
    • Left Side.
    .
  .
• Spec Sheet.
• Owner's Guide.
• 3 Year Warranty.
• CSA US.
• Dimensions: 4.4''(W) x 6.75"(H) x 23.625"(L).