Stelpro 6000W Architectural Cabinet Heater 240V Standard Density Off White
Stelpro CW100018602SW
SKU STP-CW100018602SW
Stelpro's Architectural Cabinet Heater is the ideal choice to efficiently heat large areas that may not have the adequate space to install heaters.
Image may not depict product actual color, inclusions or accessories
Stelpro's Architectural Cabinet Heater is the ideal choice to efficiently heat large areas that may not have the adequate space to install heaters.
Stelpro 6000W Architectural Cabinet Heater 240V Standard Density Off White features:
- Thermostat Sold Separately
- Ideal for areas such as schools hospitals and large retail spaces that need heat quickly but lack the space for heater installation.
- Standard density unit - 1000Watts per linear foot.
- Full-length wireway.
- Four tubular elements stainless steel sheathed with boxed aluminum fins for improved heat dissipation.
- Elements securely fastened at their centers floating in nylon sleeves at each end eliminating expansion and contraction noises.
- Durable 18-gauge steel cabinet 16-gauge steel front panel and extruded aluminum.
- Front air intake and top air discharge.
- Epoxy-polyester powder coat keeps unit looking new.
- Grilles with a thickness equivalent to 13 gauge steel.
- Thermal protection with automatic reset prevents fire hazard and over heating.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Surface mounted or wall recessed with 4-piece trim frame (optional).
- Wall or floor mounted with or without pedestal kit (optional).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
Similar Cabinet Heater Products
Stelpro CW100018602SW Description
Stelpro 6000W Architectural Cabinet Heater 240V Standard Density Off White features:
- Thermostat Sold Separately
- Ideal for areas such as schools hospitals and large retail spaces that need heat quickly but lack the space for heater installation.
- Standard density unit - 1000Watts per linear foot.
- Full-length wireway.
- Four tubular elements stainless steel sheathed with boxed aluminum fins for improved heat dissipation.
- Elements securely fastened at their centers floating in nylon sleeves at each end eliminating expansion and contraction noises.
- Durable 18-gauge steel cabinet 16-gauge steel front panel and extruded aluminum.
- Front air intake and top air discharge.
- Epoxy-polyester powder coat keeps unit looking new.
- Grilles with a thickness equivalent to 13 gauge steel.
- Thermal protection with automatic reset prevents fire hazard and over heating.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Surface mounted or wall recessed with 4-piece trim frame (optional).
- Wall or floor mounted with or without pedestal kit (optional).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
Similar Cabinet Heater Products
This page is for your reference only.
Shop for similar Cabinet Heater
Product Specifications
| Part Number | CW100018602SW, STP-CW100018602SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 240V |
| Room Size | 350 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 6000W |
| Weight | 98.00-lb |
| UPC | 626296347997 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Stelpro's Architectural Cabinet Heater is the ideal choice to efficiently heat large areas that may not have the adequate space to install heaters.
This page is for your reference only.
Shop for similar Cabinet Heater
Similar Cabinet Heater Products
Stelpro CW100018602SW Description
Stelpro 6000W Architectural Cabinet Heater 240V Standard Density Off White features:
- Thermostat Sold Separately
- Ideal for areas such as schools hospitals and large retail spaces that need heat quickly but lack the space for heater installation.
- Standard density unit - 1000Watts per linear foot.
- Full-length wireway.
- Four tubular elements stainless steel sheathed with boxed aluminum fins for improved heat dissipation.
- Elements securely fastened at their centers floating in nylon sleeves at each end eliminating expansion and contraction noises.
- Durable 18-gauge steel cabinet 16-gauge steel front panel and extruded aluminum.
- Front air intake and top air discharge.
- Epoxy-polyester powder coat keeps unit looking new.
- Grilles with a thickness equivalent to 13 gauge steel.
- Thermal protection with automatic reset prevents fire hazard and over heating.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Surface mounted or wall recessed with 4-piece trim frame (optional).
- Wall or floor mounted with or without pedestal kit (optional).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
Product Specifications
| Part Number | CW100018602SW, STP-CW100018602SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 240V |
| Room Size | 350 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 6000W |
| Weight | 98.00-lb |
| UPC | 626296347997 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?