Stelpro 2-ft 400W Mid-Density Aluminum Baseboard Heater, 50 Sq.Ft, 1365 BTU/H, 120V, S.White
Stelpro AALUX306041SW
SKU STP-AALUX306041SW
The ALUX3's sturdy aluminum design and efficient heating technology make it ideal for larger spaces, residential or commercial, where larger amounts of heat are necessary.
Image may not depict product actual color, inclusions or accessories
The ALUX3's sturdy aluminum design and efficient heating technology make it ideal for larger spaces, residential or commercial, where larger amounts of heat are necessary.
Stelpro Off White, 120V, 400W Architectural Baseboard Heater, Medium Density Features:
- 3 in x 4 in compact profile.
- Solid 20-gauge steel cabinet.
- Aluminum thickness equivalent to 10 gauge.
- Ideal for office, commercial space, hotel lobby, solarium, school, hospital.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4 in prevent foreign objects from entering the unit.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Extruded aluminum front and top cover with a unique, luxury design.
- Extremely solid, impact and rust resistant.
- Epoxy-polyester powdercoat or anodized aluminum finish.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in Thermostat for AALUX3 Heaters accessible without removing front grille, installed in the left junction box only, (optional)
- Single Pole.
- Double Pole.
- Low voltage relay kit installed in left junction box only (optional).
- Multiple integrated controls can be installed in the same baseboard inside one or two extensions (optional).
- Surface mounted.
- Wall or Floor mounted with or without pedestal kit (optional)
- Single Pedestal.
- Double Pedestal.
- Wiring compartments at both ends of unit.
- For a continuous look, custom blank sections with a simple attachment system are available (optional)
- Joiner Strip.
- Insdie Corner.
- Outsdie Corner.
- Clean Back.
- Air Filter.
- Disconnect Switch (optional)
- 277V?
- Left Side Disconnect.
- Right Side Disconnect.
- 347-600V
- Disconnect Switch.
- 277V?
- CSA US.
Stelpro AALUX306041SW Accessories
Stelpro AALUX306041SW Accessories
Similar Baseboard Heater - Up to 25 sq. ft. Products
Stelpro AALUX306041SW Description
Stelpro Off White, 120V, 400W Architectural Baseboard Heater, Medium Density Features:
- 3 in x 4 in compact profile.
- Solid 20-gauge steel cabinet.
- Aluminum thickness equivalent to 10 gauge.
- Ideal for office, commercial space, hotel lobby, solarium, school, hospital.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4 in prevent foreign objects from entering the unit.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Extruded aluminum front and top cover with a unique, luxury design.
- Extremely solid, impact and rust resistant.
- Epoxy-polyester powdercoat or anodized aluminum finish.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in Thermostat for AALUX3 Heaters accessible without removing front grille, installed in the left junction box only, (optional)
- Single Pole.
- Double Pole.
- Low voltage relay kit installed in left junction box only (optional).
- Multiple integrated controls can be installed in the same baseboard inside one or two extensions (optional).
- Surface mounted.
- Wall or Floor mounted with or without pedestal kit (optional)
- Single Pedestal.
- Double Pedestal.
- Wiring compartments at both ends of unit.
- For a continuous look, custom blank sections with a simple attachment system are available (optional)
- Joiner Strip.
- Insdie Corner.
- Outsdie Corner.
- Clean Back.
- Air Filter.
- Disconnect Switch (optional)
- 277V?
- Left Side Disconnect.
- Right Side Disconnect.
- 347-600V
- Disconnect Switch.
- 277V?
- CSA US.
Stelpro AALUX306041SW Accessories
Similar Baseboard Heater - Up to 25 sq. ft. Products
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 25 sq. ft.
Product Specifications
| Part Number | AALUX306041SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 120V |
| Power Type | Hardwired |
| Room Size | < 50 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 400W |
| Product Dimensions | 23.63-in X 3-in X 4-in |
| Weight | 6.70-lb |
| UPC | 626296443934 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
The ALUX3's sturdy aluminum design and efficient heating technology make it ideal for larger spaces, residential or commercial, where larger amounts of heat are necessary.
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 25 sq. ft.
Stelpro AALUX306041SW Accessories
Similar Baseboard Heater - Up to 25 sq. ft. Products
Stelpro AALUX306041SW Description
Stelpro Off White, 120V, 400W Architectural Baseboard Heater, Medium Density Features:
- 3 in x 4 in compact profile.
- Solid 20-gauge steel cabinet.
- Aluminum thickness equivalent to 10 gauge.
- Ideal for office, commercial space, hotel lobby, solarium, school, hospital.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4 in prevent foreign objects from entering the unit.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Extruded aluminum front and top cover with a unique, luxury design.
- Extremely solid, impact and rust resistant.
- Epoxy-polyester powdercoat or anodized aluminum finish.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in Thermostat for AALUX3 Heaters accessible without removing front grille, installed in the left junction box only, (optional)
- Single Pole.
- Double Pole.
- Low voltage relay kit installed in left junction box only (optional).
- Multiple integrated controls can be installed in the same baseboard inside one or two extensions (optional).
- Surface mounted.
- Wall or Floor mounted with or without pedestal kit (optional)
- Single Pedestal.
- Double Pedestal.
- Wiring compartments at both ends of unit.
- For a continuous look, custom blank sections with a simple attachment system are available (optional)
- Joiner Strip.
- Insdie Corner.
- Outsdie Corner.
- Clean Back.
- Air Filter.
- Disconnect Switch (optional)
- 277V?
- Left Side Disconnect.
- Right Side Disconnect.
- 347-600V
- Disconnect Switch.
- 277V?
- CSA US.
Product Specifications
| Part Number | AALUX306041SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 120V |
| Power Type | Hardwired |
| Room Size | < 50 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 400W |
| Product Dimensions | 23.63-in X 3-in X 4-in |
| Weight | 6.70-lb |
| UPC | 626296443934 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?