Stelpro 7-ft 1750W Mid-Density Aluminum Baseboard Heater, 200 Sq.Ft, 5972 BTU/H, Soft White

Stelpro 1750W Architectural Baseboard Heater, 250W/Ft, 480V, Soft White Features:

• 3 in x 4 in compact profile.
• Solid 20-gauge steel cabinet.
• Aluminum thickness equivalent to 10 gauge.
• Ideal for office, commercial space, hotel lobby, solarium, school, hospital.
• Thermal protection with automatic reset.
• Full-length wireway.
• Pencil-proof openings of less than 1/4 in prevent foreign objects from entering the unit.
• Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
• Element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
• Extruded aluminum front and top cover with a unique, luxury design.
• Extremely solid, impact and rust resistant.
• Epoxy-polyester powdercoat or anodized aluminum finish.
• Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
• Built-in Thermostat for AALUX3 Heaters accessible without removing front grille, installed in the left junction box only, (optional)
  • ​Single Pole.
  • Double Pole.
  .
• Low voltage relay kit installed in left junction box only (optional).
• Multiple integrated controls can be installed in the same baseboard inside one or two extensions (optional).
• Surface mounted.
• Wall or Floor mounted with or without pedestal kit (optional)
  • Single Pedestal.
  • Double Pedestal.
  .
• Wiring compartments at both ends of unit.
• For a continuous look, custom blank sections with a simple attachment system are available (optional)
  • Joiner Strip.
  • Insdie Corner.
  • Outsdie Corner.
  • Clean Back.
  • Air Filter.
  .
• Disconnect Switch (optional)
  • 277V​
    • Left Side Disconnect.
    • Right Side Disconnect.
    .
  • 347-600V
    • Disconnect Switch.
    .
  .
• CSA US.
• Spec Sheet.
• User's Guide.
• Dimensions: 82.69in(L) x 3in(W) x 4in(H).