Stelpro 7-ft 1750W Aluminum Draft Barrier, Up To 200 Sq.Ft, 5972 BTU/H, 208V
Stelpro DBI21178CA
SKU STP-DBI21178CA
Stelpro's Aluminum Draft Barrier are available in three different wattage densities: low, medium, and standard. These products are ideal for offices, entryways, schools, and hospitals.
Image may not depict product actual color, inclusions or accessories
Stelpro's Aluminum Draft Barrier are available in three different wattage densities: low, medium, and standard. These products are ideal for offices, entryways, schools, and hospitals.
Stelpro 1750W 7ft. Aluminum Draft Barrier, Standard Density, 208V, Anodized Aluminum features:
- Thermostat Sold Separately
- Standard Density Unit- 250 Watts per linear foot.
- Durable 18-gauge steel cabinet.
- Epoxy-polyester powder coat keeps unit looking new.
- Front air intake and top air discharge.
- Thermal protection with automatic reset prevents fire hazards and overheating.
- Full-length wireway, single tubular stainless steel sheathed element.
- Pencil-proof openings prevent unwanted objects from penetrating the unit.
- Boxed aluminum fins improve heat dissipation, heating element fastened at its center.
- Reduced noise output from unit.
- Wall thermostat not included - use of a wall thermostat is strongly recommended.
- Built-in tamperproof thermostat accessible without removing front grill installed in left junction box only (optional).
- Low voltage relay kit installed in the left or right junction box (optional).
- Built-in thermostat with button installed in the left junction box only (optional).
Similar Baseboard Heater - Up to 300 sq. ft. Products
Stelpro DBI21178CA Description
Stelpro 1750W 7ft. Aluminum Draft Barrier, Standard Density, 208V, Anodized Aluminum features:
- Thermostat Sold Separately
- Standard Density Unit- 250 Watts per linear foot.
- Durable 18-gauge steel cabinet.
- Epoxy-polyester powder coat keeps unit looking new.
- Front air intake and top air discharge.
- Thermal protection with automatic reset prevents fire hazards and overheating.
- Full-length wireway, single tubular stainless steel sheathed element.
- Pencil-proof openings prevent unwanted objects from penetrating the unit.
- Boxed aluminum fins improve heat dissipation, heating element fastened at its center.
- Reduced noise output from unit.
- Wall thermostat not included - use of a wall thermostat is strongly recommended.
- Built-in tamperproof thermostat accessible without removing front grill installed in left junction box only (optional).
- Low voltage relay kit installed in the left or right junction box (optional).
- Built-in thermostat with button installed in the left junction box only (optional).
Similar Baseboard Heater - Up to 300 sq. ft. Products
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 300 sq. ft.
Product Specifications
| Part Number | DBI21178CA |
| Certificate | CSA US |
| Heating Technology | Convection |
| Material | Steel, Aluminum |
| Maximum Voltage | 208V |
| Warranty | 3 Yr |
| Wattage | 1750W |
| Product Dimensions | 82.69-in X 2.56-in X 5.75-in |
| Weight | 23.40-lb |
| UPC | 626296102893 |
Manufacturer Description
ALUM. DRAFT BARRIER ANODIZED ALUMINUM 1750W 20
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Stelpro's Aluminum Draft Barrier are available in three different wattage densities: low, medium, and standard. These products are ideal for offices, entryways, schools, and hospitals.
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 300 sq. ft.
Similar Baseboard Heater - Up to 300 sq. ft. Products
Stelpro DBI21178CA Description
Stelpro 1750W 7ft. Aluminum Draft Barrier, Standard Density, 208V, Anodized Aluminum features:
- Thermostat Sold Separately
- Standard Density Unit- 250 Watts per linear foot.
- Durable 18-gauge steel cabinet.
- Epoxy-polyester powder coat keeps unit looking new.
- Front air intake and top air discharge.
- Thermal protection with automatic reset prevents fire hazards and overheating.
- Full-length wireway, single tubular stainless steel sheathed element.
- Pencil-proof openings prevent unwanted objects from penetrating the unit.
- Boxed aluminum fins improve heat dissipation, heating element fastened at its center.
- Reduced noise output from unit.
- Wall thermostat not included - use of a wall thermostat is strongly recommended.
- Built-in tamperproof thermostat accessible without removing front grill installed in left junction box only (optional).
- Low voltage relay kit installed in the left or right junction box (optional).
- Built-in thermostat with button installed in the left junction box only (optional).
Product Specifications
| Part Number | DBI21178CA |
| Certificate | CSA US |
| Heating Technology | Convection |
| Material | Steel, Aluminum |
| Maximum Voltage | 208V |
| Warranty | 3 Yr |
| Wattage | 1750W |
| Product Dimensions | 82.69-in X 2.56-in X 5.75-in |
| Weight | 23.40-lb |
| UPC | 626296102893 |
Manufacturer Description
ALUM. DRAFT BARRIER ANODIZED ALUMINUM 1750W 20
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?