Eaton Wiring 0.70-0.85" Bus Drop Safety Grip, Single Eye, 1900lb Max. Capacity
Eaton Wiring BDS70
SKU ETW-BDS70
Eaton Wiring's 0.70-0.85" Single Eye Safety Grip is easy to install and relieves tension and absorbs vibration made from electrical connections. Shop HomElectrical for a wide variety of Safety Grips today!
Image may not depict product actual color, inclusions or accessories
Eaton Wiring's 0.70-0.85" Single Eye Safety Grip is easy to install and relieves tension and absorbs vibration made from electrical connections. Shop HomElectrical for a wide variety of Safety Grips today!
Eaton Wiring 0.70-0.85" Bus Drop Safety Grip, Single Eye, 1900lb MaximumCapacity features:
- Indoor and outdoor use only, light-duty applications.
- Support weight of overhead flexible cables or bus drop cables.
- Relieve the strain, pull, vibration and flexing on wire connections of electrical equipment.
- Can be used with optional bus drop safety spring to reduce tension and prevent pullout to avoid accidents and costly downtime.
- Gripping action increases in direct proportion to the amount of tension applied to cable.
- Wide range construction from high strength galvanized steel wire.
- Easy installation requiring no special tools.
- Optional bus drop safety spring can be used with single eye type by disassembling draw bar from coil, placing through eye loop and replacing draw bar.
- Single eye for use when cable is vertical and for applications where cable bends.
- Cable Range: 0.70-0.85".
- Mesh Length: 8.5".
- Bale Length: 9".
Similar Strain Relief Cord Grip Products
Eaton Wiring BDS70 Description
Eaton Wiring 0.70-0.85" Bus Drop Safety Grip, Single Eye, 1900lb MaximumCapacity features:
- Indoor and outdoor use only, light-duty applications.
- Support weight of overhead flexible cables or bus drop cables.
- Relieve the strain, pull, vibration and flexing on wire connections of electrical equipment.
- Can be used with optional bus drop safety spring to reduce tension and prevent pullout to avoid accidents and costly downtime.
- Gripping action increases in direct proportion to the amount of tension applied to cable.
- Wide range construction from high strength galvanized steel wire.
- Easy installation requiring no special tools.
- Optional bus drop safety spring can be used with single eye type by disassembling draw bar from coil, placing through eye loop and replacing draw bar.
- Single eye for use when cable is vertical and for applications where cable bends.
- Cable Range: 0.70-0.85".
- Mesh Length: 8.5".
- Bale Length: 9".
Similar Strain Relief Cord Grip Products
Free Shipping Eligible
Product Specifications
| Part Number | BDS70 |
| Certificate | CSA US |
| Material | Steel |
| Product Dimensions | 16.25-in X 2.50-in X 0.25-in |
| Weight | 0.10-lb |
| UPC | 040893646633 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton Wiring's 0.70-0.85" Single Eye Safety Grip is easy to install and relieves tension and absorbs vibration made from electrical connections. Shop HomElectrical for a wide variety of Safety Grips today!
Free Shipping Eligible
Similar Strain Relief Cord Grip Products
Eaton Wiring BDS70 Description
Eaton Wiring 0.70-0.85" Bus Drop Safety Grip, Single Eye, 1900lb MaximumCapacity features:
- Indoor and outdoor use only, light-duty applications.
- Support weight of overhead flexible cables or bus drop cables.
- Relieve the strain, pull, vibration and flexing on wire connections of electrical equipment.
- Can be used with optional bus drop safety spring to reduce tension and prevent pullout to avoid accidents and costly downtime.
- Gripping action increases in direct proportion to the amount of tension applied to cable.
- Wide range construction from high strength galvanized steel wire.
- Easy installation requiring no special tools.
- Optional bus drop safety spring can be used with single eye type by disassembling draw bar from coil, placing through eye loop and replacing draw bar.
- Single eye for use when cable is vertical and for applications where cable bends.
- Cable Range: 0.70-0.85".
- Mesh Length: 8.5".
- Bale Length: 9".
Product Specifications
| Part Number | BDS70 |
| Certificate | CSA US |
| Material | Steel |
| Product Dimensions | 16.25-in X 2.50-in X 0.25-in |
| Weight | 0.10-lb |
| UPC | 040893646633 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter
Need Assistance?