Morris Above Ground Insulation Piercing Connector, Main 1/0-8, Tap 2-10
Morris 96106
SKU MRS-96106
Morris' above ground insulation piercing connector has a main range of 1/0-8 and a tap range of 2-10. Can be installed on energized circuits, eliminating power shutdowns. Grab this connector from HomElectrical.com today!
Image may not depict product actual color, inclusions or accessories
Morris' above ground insulation piercing connector has a main range of 1/0-8 and a tap range of 2-10. Can be installed on energized circuits, eliminating power shutdowns. Grab this connector from HomElectrical.com today!
- Main Range: 1/0-8.
- Tap Range: 2-10.
- Connector installs in just minutes, saving many man-hours on the job.
- Eliminates wire stripping, connecting, taping of split bolts, and adding inhibitor.
- Above-ground connector can be installed on energized circuits, eliminating power shutdowns.
- Overhead services - both insulated and bare mains, above-grade URD services, street lighting, non-tension splicing and tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
- Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection and eliminating the possibility of hot spots, damaged wires, or loose connections.
- No cable stripping required. Simply insert the jacketed cable into the entry port and tighten with a 1/2-in 6-point socket.
- Red turbo spacer allows the tap side to remain open while you hand-tighten the above-ground connector on the main wire.
- Blue rubber insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger.
- The bolt and all external parts of the connector are completely isolated from energized parts, and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
- Can be installed on energized conductors, however the tap must not be under load.
- Corrosion-free connection suitable for hot, cold, damp, and salty environments. When properly installed, the connector seals watertight. This is accomplished by a sealant tank that compresses during installation and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin-plated, the shell is high-strength UV-resistant thermoplastic insulating material, and steel bolts are galvanized.
- Connector bodies are made from high-strength fiber-reinforced thermoplastic with galvanized steel bolts.
Similar Wire Connector Products
Morris 96106 Description
- Main Range: 1/0-8.
- Tap Range: 2-10.
- Connector installs in just minutes, saving many man-hours on the job.
- Eliminates wire stripping, connecting, taping of split bolts, and adding inhibitor.
- Above-ground connector can be installed on energized circuits, eliminating power shutdowns.
- Overhead services - both insulated and bare mains, above-grade URD services, street lighting, non-tension splicing and tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
- Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection and eliminating the possibility of hot spots, damaged wires, or loose connections.
- No cable stripping required. Simply insert the jacketed cable into the entry port and tighten with a 1/2-in 6-point socket.
- Red turbo spacer allows the tap side to remain open while you hand-tighten the above-ground connector on the main wire.
- Blue rubber insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger.
- The bolt and all external parts of the connector are completely isolated from energized parts, and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
- Can be installed on energized conductors, however the tap must not be under load.
- Corrosion-free connection suitable for hot, cold, damp, and salty environments. When properly installed, the connector seals watertight. This is accomplished by a sealant tank that compresses during installation and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin-plated, the shell is high-strength UV-resistant thermoplastic insulating material, and steel bolts are galvanized.
- Connector bodies are made from high-strength fiber-reinforced thermoplastic with galvanized steel bolts.
Similar Wire Connector Products
Get FREE shipping on eligible order of $99+
Free Shipping Eligible
Product Specifications
| Part Number | 96106 |
| Product Dimensions | 3.70-in X 3-in X 2-in |
| Weight | 0.30-lb |
| UPC | 601986961066 |
Manufacturer Description
Ins Pierc Main1/0-8 Tap2-10
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Morris' above ground insulation piercing connector has a main range of 1/0-8 and a tap range of 2-10. Can be installed on energized circuits, eliminating power shutdowns. Grab this connector from HomElectrical.com today!
Get FREE shipping on eligible order of $99+
Free Shipping Eligible
Similar Wire Connector Products
Morris 96106 Description
- Main Range: 1/0-8.
- Tap Range: 2-10.
- Connector installs in just minutes, saving many man-hours on the job.
- Eliminates wire stripping, connecting, taping of split bolts, and adding inhibitor.
- Above-ground connector can be installed on energized circuits, eliminating power shutdowns.
- Overhead services - both insulated and bare mains, above-grade URD services, street lighting, non-tension splicing and tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
- Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection and eliminating the possibility of hot spots, damaged wires, or loose connections.
- No cable stripping required. Simply insert the jacketed cable into the entry port and tighten with a 1/2-in 6-point socket.
- Red turbo spacer allows the tap side to remain open while you hand-tighten the above-ground connector on the main wire.
- Blue rubber insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger.
- The bolt and all external parts of the connector are completely isolated from energized parts, and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
- Can be installed on energized conductors, however the tap must not be under load.
- Corrosion-free connection suitable for hot, cold, damp, and salty environments. When properly installed, the connector seals watertight. This is accomplished by a sealant tank that compresses during installation and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin-plated, the shell is high-strength UV-resistant thermoplastic insulating material, and steel bolts are galvanized.
- Connector bodies are made from high-strength fiber-reinforced thermoplastic with galvanized steel bolts.
Product Specifications
| Part Number | 96106 |
| Product Dimensions | 3.70-in X 3-in X 2-in |
| Weight | 0.30-lb |
| UPC | 601986961066 |
Manufacturer Description
Ins Pierc Main1/0-8 Tap2-10
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Your voice matters. Be the first to leave a review and help other pros shop smarter