Shop Morris Products Fixture Hangers & Suspension

17636

Plate Size: 5-3/8-in x 3-1/2-in.Four-hole tee plate with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Provides secure...

17634

Angle Size: 4-1/8-in x 3-1/2-in.Four-hole 3-way corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Designed...

17633

Angle Height: 4-1/8-in.Three-hole cross corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Provides reinforced support...

17632

Plate Size: 3-1/2-in x 3-1/2-in.Three-hole corner plate with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Creates secure...

17630

Angle Height: 2-1/4-in.Two-hole cross corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Designed for channel...

17628

Angle Size: 2-in x 1-7/8-in.Two-hole corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Designed for...

17626

Plate Length: 7-1/4-in.Four-hole splice plate with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Provides durable support for...

17624

Plate Length: 5-3/8-in.Three-hole splice plate with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Designed for channel framing...

17622

Plate Length: 3-1/2-in.Two-hole splice plate with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Provides secure channel and...

18140

Mount Type: Side mount.Fits 1/2-in and 3/4-in conduit.Spring steel beam clamp with pre-installed conduit hanger.Positive locking conduit hanger design.Rated 100...

18192

Conduit Size: 1-in EMT or 3/4-in rigid/IMC.Suspends conduit from the bottom of a beam.Will pivot 360° for positioning.Installs with hammer...

18191

Conduit Size: 3/4-in EMT or 1/2-in rigid/IMC.Suspends conduit from the bottom of a beam.Will pivot 360° for positioning.Installs with hammer...

18190

Conduit Size: 1/2-in EMT.Suspends conduit from the bottom of a beam.Will pivot 360° for positioning.Installs with hammer only.25 lb static...

18181

Flange Thickness: 1/16-in to 1/4-in.Designed for vertical flange use.Provides clearance for 1/4-in bolt.Can be used with S-hooks, perforated strap and...

18180

Flange Thickness: 1/16-in to 1/4-in.Designed for angled Z purlin use.Provides clearance for 1/4-in bolt.Can be used with S-hooks, perforated strap...

18172

Conduit Size: 1-in conduit.Z purlin conduit hanger assembly installs without power tools.Compensates for the angle of purlin.100 lb static load...

18171

Conduit Size: 1/2-in to 3/4-in conduit.Z purlin conduit hanger assembly installs without power tools.Compensates for the angle of purlin.100 lb...

18161

Rod Size: 3/8-in threaded rod.Z purlin rod hanger assembly installs without power tools.Compensates for the angle of purlin during installation.100...

18160

Rod Size: 1/4-in threaded rod.Z purlin rod hanger assembly installs without power tools.Compensates for the angle of purlin during installation.100...

18156

Hole Size: 1/4-in hole.Designed for wire, S-hooks, perforated strap and jack chain.Used to suspend fixtures from Z purlin structures.Installs without...

18155

Hole Size: 1/4-in bottom hole.Used to suspend fixtures from Z purlin structures.Installs without power tools.Compensated for angle of purlin.100 lb...

17616

Bolt Size: 3/8-in.Square flat steel washer with zinc electro-plated finish.7/16-in hole size.1-5/8-in wide x 1/4-in thick construction.Designed for channel and...

18130

Mount Type: Bottom mount.Fits 1/2-in and 3/4-in conduit.Spring steel beam clamp with pre-installed conduit hanger.Positive locking conduit hanger design.Rated 100...

18124

Flange Thickness: 5/16-in to 1/2-in.Includes 1/4-20 x 3/8-in staked stud.Used to suspend boxes, fixtures and bridle rings.Supports mounting from the...

18123

Flange Thickness: 1/8-in to 1/4-in.Includes 1/4-20 x 3/8-in staked stud.Used to suspend boxes, fixtures and bridle rings.Supports mounting from the...

18111

Flange Size: 1/2-in.Used with conduit hangers, bridle rings and threaded rod.Bottom and back tapped for rods.Case hardened steel set screw...

18096

Thread Size: 1/4-20.Crows foot fixture hanger for fixture support applications.Malleable iron construction.1.00-in A dimension.1.10-in B dimension....

18094

Box Type: 4-in octagon electrical box.Supports high bays and hanging fixtures on sloped ceilings.Pivot ball allows 20° swing from vertical.Fits...

18093

Box Type: 4-in square electrical box.Supports light fixtures, security cameras and exit signs.Pivot ball allows 20° swing from vertical.Fits 3/4-in...

18092

Thread Size: 3/4-in NPT.Used to hang high bay light fixtures.Pre-installed set screw helps prevent vibratory loosening.Malleable iron construction.Rated for 300...