Shop HVAC Parts & Accessories

87025

3/8-in Quick Connect 90 Degree Elbow For HVAC/R up to 870 psi (60 bar) Quick and easy push-in Flame-free: no...

81968

8x8 Fits 6, 7, 8-in collars Stepped Collar for multiple duct sizes Collar tabs easily tear away unneeded sections -...

84383

For 3/4-in Hassle free- no need for springs or heavy and expensive equipment No more kinking Bends both lines simultaneously...

86690

6 Pack with Key Silver 1/4-in Thread Universal Resists crushing and removal without key Corrosion resistant anodized aluminum Integral neoprene...

3CGCUPG

Gray 3-in Coupler Adjustable depth, 1.75-in to 2.5-in Quick-snap covers that won't pop off Protective peel-n-go film Shrink-wrapped with 1...

3CGCUP

White 3-in Coupler Adjustable depth, 1.75-in to 2.5-in Quick-snap covers that won't pop off Protective peel-n-go film Shrink-wrapped with 1...

3CGFLXSM

White 3-in Flexible Elbow, Small Adjustable depth, 1.75-in to 2.5-in Quick-snap covers that won't pop off Protective peel-n-go film Shrink-wrapped...

CGINT90

White 4.5-in 90 Degree Elbow; Internal Adjustable depth, 2.25-in to 3.5-in Quick-snap covers that won't pop off Protective peel-n-go film...

83888

110W/125W 1.1 Amp/1.3 Amp 50/60 Hertz 230V 24-ft Shutoff 1/2 gallon high impact ABS tank for durability Float arm design...

97210

Kit Includes (9) 1/4-in (9) 3/8-in (9) 1/2-in (9) 5/8-in 45 Degree copper stamping with Loctite coating Locking tabs clip...

87761

Length: 14-in Max Load: 309 lbs Ideal for piping, duct runs, cable trays and condensers Weather resistant PVC Linear track...

96503

1 - 3 Ton 2-wire design for easy installation Extend the life of compressors Reduces stress on compressor during start...

RAD10

For more positive control of condensate water, the drain kit routes condensate to the exterior or the interior of...

RAB42PG

1 year limited warranty42" wall sleeveQuick snap installationFor all Zoneline AZ series modelsWhite finish...

DBLT4W

Reduces Lint Accumulation in the Ductwork and Dryer Vent Minimizes the Risk of a Dryer Fire Suitable for a...

87658

16-in Height Galvanized steel frame with 12-in feet Adjustable leg assemblies Supplied boxed with lamp kits Ideal rooftop support of...

RAB26A

Quick snap wall sleeve assembly Solid-stranded wall case fabricated of galvanized steel with baked enamel finish Polymer gasket surrounds...

RAKDTKH

3 Philips head screws are includedCan be installed on series A 230V...

RAG70

Made for use with PTAC insulated wall sleeve Constructed of stamped aluminum...

ACMS

Cage ONLY Fits condensers up to 16.5-in x 45-in x 57-in Durable 16 Gauge Powder-coated steel...

RAKTK8W10

Color coded wires Can be used with electric heat and heat pump thermostats Compatible with all PTAC and VTAC Zoneline...

RAK148H2A

Non-programmable thermostat 2 Speed wired thermostat Comes with a backlit display Has a 1 year warranty...

3CGKIT

White 3-in Wall Duct Kit Includes: (3) 48-in Ducts (3) Couplers (1) Wall Inlet (1) End Cap (1) 90 Deg...

Rn 1

RF1 RRNC 2.0 Fan Type Pressure Category: Low Application Pressure Rang (in w.c.): 0.0 to 0.8 Maximum Pressure (in w.c.):...

BN8100

Features height-adjustable leg assemblies that extend easily from 12-in to 18-in and can be customized to fit nearly any terrain...

RAKETKH

3 Philips head screws are included Can be installed on series A 265V...

86689

Size: 1/4-in; Red A2L50 PackDurable: Precision machined from high grade brass and covered by a shielding aluminum shroud, Novent Red...

MLP1SS

Non-Returnable | Cannot be Cancelled Signature LP Kit Series Liquid propane ignition Suitable for the Signature Series Single Stage Gas...

RAG14E

Extruded aluminum grill for applications with RAB46/47 or 48NOT compatible with the RAD4A1 and RAD10 external drain kits...

84355

Gray 4.5-in Tee The Tee splits the ducts in 2 directions, offering flexibility during an install Satin finish Heavy duty...