Shop Cable & Wire Organizer

32050

Streamline your rough-in process with the Poke-E Perforated Strip, a professional-grade solution for securing and organizing cable runs. Designed specifically...

LV1

Single Gang Adjusts to fit wall thickness: 1/4-in to 1-in For installation on existing construction Low voltage class 2 only...

210-648

Short Angled Blade: 0.098-in x 0.016-in (2.5-mm x 0.4-mm) Partially insulated shaft RoHS Compliant...

LVS1

Single Gang; Screw-On Installation Ready to install - screws come parked-in-place Built-in loop for tying off cable Allows wall plate...

210-722

The operating tool set includes all 3 types of blades for your terminal block tasks. Type 1: (2.5 x 0.4)...

210-658

Short Angled 3.5 x 0.5 mm Partially insulated shaft Ideal for operating 280 Series Front-Entry Sensor/Actuator Terminal Block RoHS Compliant...

210-198

Copper DIN-rail Unslotted 35 x 15 mm 2.3 mm Thick 2 m Long Mounting Accessories Steel DIN-rails are not suited...

210-154

Finish: Silver Material: Aluminum Length: 1000mm / 39.37 inches Width: 18mm / 0.709 inches Height: 7mm / 0.276 inches RoHS...

CED135

Cable entry device for low voltage wire Includes (2) #6 Screws Non0metallic Organizes low voltage cable into a neat bundle...

CER1

Single Gang Protects cable and provides installation versatility Non-rusting, paintable plastic Designed to install low voltage Class 2 only Best...

DI-WM-JC

J-Clip used for wire management and includes 20 screws Recommended for: CL-2, RJ45, XLLR, and AC power cords Material: Polyamide...

LV2LP

Two Gang with low profile Adjusts to fit wall thickness: 1/2-in to 5/8-in For installation on existing construction Low voltage...

CED130

Cable entry device for low voltage wire Includes (2) #6 Screws Non0metallic Organizes low voltage cable into a neat bundle...

G4WH

Cat5e Screw Clip 100 Per Bag Ideal for Organizing CAT5e Cables Color White...

DI-WLMC-12MM

Includes 12mm tape, 10 packs of wet location over clips, and 20 screws Resistant to water, and is perfect for...

210-720

3.5 x 0.5 mm Type 2 Partially insulated shaft The bade dimensions are ideal for easy operation of front-entry terminal...

VSC-1538UVB

Gardner Bender Vertical Siding Clips, Black features: UV black color Hold wire horizontally on residential home siding No tools are...

XTM-401

Gardner Bender 0.38-in Stainless Steel Cushion Clamp features: Secure wire and cable wherever vibrations may occur Corrosive-resistant stainless steel Size:...

XTM-405

Gardner Bender 0.5-in Stainless Steel Cushion Clamp features: Secure wire and cable wherever vibrations may occur Corrosive-resistant stainless steel Size:...

210-111

Steel DIN-rail Slotted 15 x 5.5 mm 1 mm Thick 2 m Long Mounting Accessories Steel DIN-rails are not suited...

210-112

Steel DIN-rail Slotted Hole width: 25 mm Hole Spacing: 36 mm 35 x 7.5 mm 1 mm Thick 2 m...

210-113

Steel DIN-rail Unslotted 35 x 7.5 mm 1 mm Thick 2 m Long Mounting Accessories Steel DIN-rails are not suited...

210-114

Steel DIN-rail Unslotted 35 x 15 mm 1.5 mm Thick 2 m Long Mounting Accessories Steel DIN-rails are not suited...

210-115

Steel DIN-rail Slotted Hole width: 18 mm Hole Spacing: 25 mm 35 x 7.5 mm 1 mm Thick 2 m...

210-118

Steel DIN-rail Unslotted 35 x 15 mm 2.3 mm Thick 2 m Long Mounting Accessories Steel DIN-rails are not suited...

210-148

Support bracket Angled Without Screw RoHS Compliant...

210-149

Screw M 5 x 8 For angled support bracket RoHS Compliant...

210-197

Steel DIN-rail Slotted 35 x 15 mm 1.5 mm Thick 2 m Long Mounting Accessories Steel DIN-rails are not suited...

210-657

Short 3.5 x 0.5 mm Partially insulated shaft Ideal for operating 280 Series Front-Entry Sensor/Actuator Terminal Block RoHS Compliant...

210-719

2.5 x 0.4 mm Type 1 Partially insulated shaft Operation is performed perpendicular to conductor entry The bade dimensions are...