Shop Conduit Fittings & Conduit Nipples

17633

Angle Height: 4-1/8-in.Three-hole cross corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Provides reinforced support...

17634

Angle Size: 4-1/8-in x 3-1/2-in.Four-hole 3-way corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Designed...

17636

Plate Size: 5-3/8-in x 3-1/2-in.Four-hole tee plate with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Provides secure...

17638

Angle Type: Open 45-degree corner angle.Two-hole corner angle with zinc electro-plated finish.9/16-in mounting holes.1-5/8-in wide x 1/4-in thick steel construction.Designed...

17682

Channel Size: 13/16-in.Used to cover the ends of channel strut.Constructed from soft PVC material.Provides a finished appearance.Helps protect exposed channel...

17684

Channel Size: 1-5/8-in.Used to cover the ends of channel strut.Constructed from soft PVC material.Provides a finished appearance.Helps protect exposed channel...

18012

Flange Thickness: 1/8-in to 1/4-in.Can suspend boxes, fixtures and bridle rings.Bottom and back tapped 1/4-20.Spring steel construction.UL Listed....

18014

Flange Thickness: 5/16-in to 1/2-in.Can suspend boxes, fixtures and bridle rings.Bottom and back tapped 1/4-20.Spring steel construction.UL Listed....

18016

Rod Size: 1/4-in to 3/8-in.Fits beam flanges up to 1/2-in thick.Bottom and back tapped 1/4-20.Includes 10-24 tapping on back.Fast installation...

18018

Flange Thickness: 1/8-in to 1/4-in.Designed for bulb tees and beams.Provides clearance for 1/4-in bolt.200 lb static load limit.UL Listed....

18020

Flange Thickness: 5/16-in to 1/2-in.Designed for bulb tees and beams.Provides clearance for 1/4-in bolt.200 lb static load limit.UL Listed....

18022

Stud Size: 1/4-20 x 5/8-in.Supports fixtures on 15/16-in T-bar systems.Includes wing nut washer assembly.Spring steel construction.UL Listed....

18024

Conduit Size: 1/2-in and 3/4-in.Spring steel conduit clip.Keyhole design for screw mounting.Supports vertical and horizontal conduit applications.UL Listed....

18026

Supports MC, AC and BX cable.Supports cable from 12 AWG to 8 AWG.Allows horizontal or vertical mounting.Designed for positioning applications.No...

18028

Supports MC, AC and BX cable.Supports cable from 12 AWG to 8 AWG.Allows horizontal or vertical mounting.Designed for positioning applications.UL...

18030

Conduit Size: 1/2-in EMT.Supports conduit and flex cable from wire, rod or flange.Mounts on 12 AWG to 8 AWG wire.Fits...

18048

Clip Type: Multi-function.Attaches conduit or boxes to flanges, wire or rod.Fits 1/8-in to 3/8-in flanges.Attaches to No. 12 wire through...

18050

Conduit Size: 1/2-in and 3/4-in.Suspends conduit from the bottom of beam flanges.Locking clip snaps closed to secure the load.Pivots 360°...

18111

Flange Size: 1/2-in.Used with conduit hangers, bridle rings and threaded rod.Bottom and back tapped for rods.Case hardened steel set screw...

18123

Flange Thickness: 1/8-in to 1/4-in.Includes 1/4-20 x 3/8-in staked stud.Used to suspend boxes, fixtures and bridle rings.Supports mounting from the...

18124

Flange Thickness: 5/16-in to 1/2-in.Includes 1/4-20 x 3/8-in staked stud.Used to suspend boxes, fixtures and bridle rings.Supports mounting from the...

18130

Mount Type: Bottom mount.Fits 1/2-in and 3/4-in conduit.Spring steel beam clamp with pre-installed conduit hanger.Positive locking conduit hanger design.Rated 100...

18140

Mount Type: Side mount.Fits 1/2-in and 3/4-in conduit.Spring steel beam clamp with pre-installed conduit hanger.Positive locking conduit hanger design.Rated 100...

18152

Flange Thickness: 9/16-in to 3/4-in.Designed for bulb tees and beams.Provides clearance for 1/4-in bolt in tab.200 lb static load limit.UL...

18155

Hole Size: 1/4-in bottom hole.Used to suspend fixtures from Z purlin structures.Installs without power tools.Compensated for angle of purlin.100 lb...

18156

Hole Size: 1/4-in hole.Designed for wire, S-hooks, perforated strap and jack chain.Used to suspend fixtures from Z purlin structures.Installs without...

18160

Rod Size: 1/4-in threaded rod.Z purlin rod hanger assembly installs without power tools.Compensates for the angle of purlin during installation.100...

18161

Rod Size: 3/8-in threaded rod.Z purlin rod hanger assembly installs without power tools.Compensates for the angle of purlin during installation.100...

18171

Conduit Size: 1/2-in to 3/4-in conduit.Z purlin conduit hanger assembly installs without power tools.Compensates for the angle of purlin.100 lb...

18172

Conduit Size: 1-in conduit.Z purlin conduit hanger assembly installs without power tools.Compensates for the angle of purlin.100 lb static load...