Hammond 750kVA Sentinel K Transformer, 3 Ph, AL, 150C, K20, 600D-480Y/277V
Hammond SK3A0750PK2S
SKU HPS-SK3A0750PK2S
Hammond's aluminum wound 750kVA 3 phase K-factor Sentinel distribution transformer is rated 600D - 480Y/277V primary/secondary voltage, K20 K rating, 150C temp rise, and a DH7 case style. Check out more distribution transformers at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
Hammond's aluminum wound 750kVA 3 phase K-factor Sentinel distribution transformer is rated 600D - 480Y/277V primary/secondary voltage, K20 K rating, 150C temp rise, and a DH7 case style. Check out more distribution transformers at HomElectrical today!
- 750kVA, 3 Phase.
- Primary Voltage: 600 Delta; Secondary Voltage: 480Y/277V.
- Aluminum Wound with Electrostatic Shield; 150C Temperature Rise; K20 K Rating.
- K-Factor Transformer - Rated for 600V and below and is specifically designed and tested for applications that use non-linear loads.
- Floor or Wall/Ceiling mounted.
- Standard Type 3R enclosure suitable for indoor or outdoor applications.
- Standard 10kV BIL rating provides increased reliability and protection against critical equipment failure.
- All units utilize a uniform 220C insulation system with a 80C, 115C or 150C temperature rise.
- Manufactured from quality non-aging, cold rolled, silicon steel laminations using state-of-the-art equipment.
- Cores are precision cut to close tolerances which eliminates burrs and improves performance.
- Core is coated to prevent the ingress of moisture.
- Precision wound with copper or aluminum conductors that are electrically balanced to minimize axial forces during short-circuit conditions.
- Robust interface between core & coils for better short circuit performance.
Similar Electric Transformers Products
Hammond SK3A0750PK2S Description
- 750kVA, 3 Phase.
- Primary Voltage: 600 Delta; Secondary Voltage: 480Y/277V.
- Aluminum Wound with Electrostatic Shield; 150C Temperature Rise; K20 K Rating.
- K-Factor Transformer - Rated for 600V and below and is specifically designed and tested for applications that use non-linear loads.
- Floor or Wall/Ceiling mounted.
- Standard Type 3R enclosure suitable for indoor or outdoor applications.
- Standard 10kV BIL rating provides increased reliability and protection against critical equipment failure.
- All units utilize a uniform 220C insulation system with a 80C, 115C or 150C temperature rise.
- Manufactured from quality non-aging, cold rolled, silicon steel laminations using state-of-the-art equipment.
- Cores are precision cut to close tolerances which eliminates burrs and improves performance.
- Core is coated to prevent the ingress of moisture.
- Precision wound with copper or aluminum conductors that are electrically balanced to minimize axial forces during short-circuit conditions.
- Robust interface between core & coils for better short circuit performance.
Similar Electric Transformers Products
Free Shipping
$48,373.04Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | SK3A0750PK2S |
| Certificate | cUL/UL Listed, CSA US |
| Electrical Phase | 3 Ph |
| Material | Aluminum |
| Warranty | 10 Yr |
| Product Dimensions | 72-in X 54-in X 44-in |
| Weight | 4,100.00-lb |
| UPC | 803423131692 |
Manufacturer Description
D16 SNTL-K K20 3PH 750KVA 600D-480Y/277V AL 60Hz 150C 3R
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Hammond's aluminum wound 750kVA 3 phase K-factor Sentinel distribution transformer is rated 600D - 480Y/277V primary/secondary voltage, K20 K rating, 150C temp rise, and a DH7 case style. Check out more distribution transformers at HomElectrical today!
Free Shipping
$48,373.04Each
Usually Ships 1-2 Months
Similar Electric Transformers Products
Hammond SK3A0750PK2S Description
- 750kVA, 3 Phase.
- Primary Voltage: 600 Delta; Secondary Voltage: 480Y/277V.
- Aluminum Wound with Electrostatic Shield; 150C Temperature Rise; K20 K Rating.
- K-Factor Transformer - Rated for 600V and below and is specifically designed and tested for applications that use non-linear loads.
- Floor or Wall/Ceiling mounted.
- Standard Type 3R enclosure suitable for indoor or outdoor applications.
- Standard 10kV BIL rating provides increased reliability and protection against critical equipment failure.
- All units utilize a uniform 220C insulation system with a 80C, 115C or 150C temperature rise.
- Manufactured from quality non-aging, cold rolled, silicon steel laminations using state-of-the-art equipment.
- Cores are precision cut to close tolerances which eliminates burrs and improves performance.
- Core is coated to prevent the ingress of moisture.
- Precision wound with copper or aluminum conductors that are electrically balanced to minimize axial forces during short-circuit conditions.
- Robust interface between core & coils for better short circuit performance.
Product Specifications
| Part Number | SK3A0750PK2S |
| Certificate | cUL/UL Listed, CSA US |
| Electrical Phase | 3 Ph |
| Material | Aluminum |
| Warranty | 10 Yr |
| Product Dimensions | 72-in X 54-in X 44-in |
| Weight | 4,100.00-lb |
| UPC | 803423131692 |
Manufacturer Description
D16 SNTL-K K20 3PH 750KVA 600D-480Y/277V AL 60Hz 150C 3R
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?