Dabmar Flush Mount LED Lights

Installing a Flush Mount LED light requires a licensed electrician to ensure proper installation. The steps the electrician will take are below.

1. The electrician will turn off the power at the circuit breaker connected to the light.
2. Then, they will remove the existing light fixture and disconnect the wires that holding the light fixture together. Once everything is disconnected, the electrician will remove the fixture from the wall.
3. Next, yout electrician will place the new mounting bracket on the electrical box and use screws to secure it into place.
4. They will connect the wires from the new flush mount together, pairing each wire with its corresponding color in the wall. To seal the wires, the electrician will wrap electrical tape around them.
5. Once the wires are connected, the electrician will ensure the light is flush with the wall and then use the provided screws to screw it into place.
6. After completing these steps, the electrician will test the light to ensure it works.

Dabmar offers a variety of Flush Mount LED Lights. These outdoor lights include:

• LED Rectangular Surface Mounts
• Cylinder Surface Mounts
• LED Globe Surface Mounts
• LED Jar Surface Mounts
• LED Rectangular Semi-Cut Off Surface Mounts
• LED Semi-Cut Off Surface Mounts
• LED Caged Surface Mounts
• LED Canopy Light