Top Sellers in Power Tools

GEX33-5N

Disc Size: 5-in Dust Collection: Yes Eccentric Offset: 3/32-in No Load OPM: 4,500 - 12,000 Orbit Diameter: 3/16-in Orbit Radius:...

110025597

1600W; 120V Temperature range: 120 F to 1150 F Higher durability Optimized weight balance Toggled controlled temperature regulation between 120...

TS1015

Table saw rear outfeed support extension Extends working depth of Bosch GTS15-10 10 In. table saw Hardened metal construction with...

4300-5/40

Maximum RPM - No Load: 35,000 Variable Speed: 5,000 - 35,000 RPM Endless Possibilities, One Tool: From sanding to grinding,...

PS31N

Chuck Design: Keyless Chuck Size: 3/8-in No Load RPM: 0 - 350 / 0 - 1,300 Torque (in lbs): 265...

PS11N

Chuck Design: Keyless Chuck Size: 3/8-in No Load RPM: 0 - 1,300 Torque (in lbs): 115 Ergonomically designed for effortless...

110039167

20mm Made for use with HG2520E, HG2620E and industrial nozzle adapter For heat-shrinking work over a width of 20mm 1...

7760-PGK

Battery Amp Hour: 2 Charge Time: 2 Hours, 45 Minutes Maximum RPM - No Load: 25,000 Variable Speed: 8,000 -...

RS6045

Diameter: 6 Inch Soft 6-Hole Compatible with 1250DEVS, 3727DEVS, 3727DVS and ROS65VC Sanders Hook-and-Loop six-hole design reduces wobble and increases...

421

Ideal for polishing or brightening Can be used on metals and plastics Can also be used to remove light surface...

110048752

14mm Directs hot air around pipes and tubing for even heating Use on electronic hot air guns only Compatible with...

SD60-PGK

Size: 7/8-in Max RPM: 10,000 60 Grit Ideal grit for pet nail grooming Can be used for general sanding applications...

110048646

9mm Directs hot air around pipes and tubing for even heating Use on electronic hot air guns only Compatible with...

GKSRAK

Attachment kit works with the Bosch GKS18V-22 6-1/2 In. Blade-Right Circular Saw, including a rip fence and a saw hook...

628-01

Sizes: 1/32, 3/64, 1/16, 5/64, 3/32, 7/64, 1/8 Ideal for drilling Use on wood, plastics and soft metals Set of...

631

Sizes: 1/8, 5/32, 3/16, 1/4 Shank: 0.125 Drill holes up to 1/4-in in diameter Use higher speeds for hard woods,...

110048645

39mm To direct hot air around pipes and tubing for even heating Compatible with HG2220E, HG2320E/ESD, HL2020E, HL1920E, HL1820S, HL1620S...

110048647

14mm Produces a concentrated, aimed stream of hot air for precision welding or soldering May be used as a base...

90930-05

Ideal for restoring the life to your corded Dremel rotary tools The right brush means proper performance Service part only...

GSB18V-65N

Brushless motor - delivers 575-in-lbs. of max torqueSwitchable KickBack Control - reduces the risk of sudden rotational torque reaction in...

GSR18V-800CN

Brushless motor - delivers 565-in-lbs. of max torqueKickBack Control - reduces the risk of sudden rotational torque reaction in a...

GSB18V-800CB24

With BatteriesBrushless motor - delivers 565 in.-lbs. of max torqueKickBack Control - reduces the risk of sudden rotational torque reaction...

GSB18V-65B12

With BatteryBrushless motor - delivers 575-in-lbs. of max torqueSwitchable KickBack Control - reduces the risk of sudden rotational torque reaction...

GSB18V-800CB14

With BatteryBrushless motor - delivers 565 in.-lbs. of max torqueKickBack Control - reduces the risk of sudden rotational torque reaction...

GSR12V-140FCB22

Chuck Design: Keyless 1/4-in Hex No Load BPM: 0 - 400 / 0 - 1,300 Torque (in lbs): 265 Chameleon...

GRD18V-127N

Brushless motor - delivers increased power and enhanced runtimeTwo speed settings (0-1,800 and 0-550) - for greater control over power...

RA1132

Edge routing dust capture helps minimize debris and clean up in precise edge forming applicationsFor use with Bosch GKF18V-25N and...

PS130-2A

Chuck Capacity: 3/8-in Keyless Chuck Impact Rate: 0 - 19,500 No Load BPM: 0 - 380 / 0 - 1,300...

PS11-102

Chuck Design: Keyless Chuck Size: 3/8-in No Load RPM: 0 - 1,300 Torque (in lbs): 115 Ergonomically designed for effortless...

GSR12V-300N

Chuck Capacity: 3/8-in Keyless Chuck No Load RPM: 0 - 460 / 0 - 1,750 Speed: Variable Two Speed Torque...