1X4 LED Panel

A 1X4 LED Panel is a great replacement to fluorescent fixtures in schools, offices, hospitality, healthcare, and other commercial and industrial applications. 1X4 LED Light Panels are also compatible with building controls, motion sensors, timers, and occupancy sensor systems. Shop HomElectrical today to find which 1X4 LED Panel would work best in your space today!

1-30 of 133 products

$220.00Pack of 2
E16FP-14-LB4-8-CP4-MV-LVD-EMOS-2PK
$243.49Each
ESL-SPE-920-14-2545W-2765K-EM5-DHOC
$176.92Pack of 2
E16FP-14-LB4-8-CP4-MV-LVD-EM-2PK

Where would I use a 1x4 LED panel?

1X4 LED Panels are ideally used in schools, offices, healthcare buildings, and other commercial and industrial applications. With this size light, you might want to choose the 1X4 LED Panel for a rectangular shaped room. With the small width and large height of the 1X4 LED Panel, the size helps elongate a room, while still making it comfortable and spacious. The LED panels are also a good light fixture to have because they can fit in slim locations and are easy to install. 

Where would I use a 1X4 LED Panel instead of a 2X2 LED Panel?

Depending on what room you are trying to provide lighting for, you may use different sized LED Panels. 1X4 LED Panels are great for narrow spaces or long office spaces to create a uniform look. 2X2 LED Panels are more for box-shaped rooms and help create an open space. These two sizes are often used in the same locations, but depending on the size of the room, one may fit the aesthetic better than the other. Learn more about LED Panels and Troffers !

What is an IPS 1x4 LED panel?

IPS stands for internal power supply. What this means for your LED panel is that you still have your bright, energy-efficient LED light, however the power supply is built inside the frame to make installation easier for you. 

How are 1x4 LED Panels installed?

LED panels are easy to install and use because of their thin frame and they can easily replace other fixtures. If a light was previously installed where you are inserting the 1X4 LED Panel, installation will be easy.

  • You first want to slide the Panel into the ceiling frame.
  • Once in, you will want to pull back the suspension hook away from the panel until it is perpendicular to the panel backing.
  • After this, bend the hook are until it is facing perpendicular to the hook body.
  • Hook the panel light onto the t-bar until the light is suspended and fully supported.
  • Once secure, remove the knockout hole on the end of the LED driver box. You will have to then secure the wires and make sure you are connecting the correct wires by knowing which ones have a positive, negative, or neutral charge.
  • Once all of the wiring is done correctly, turn the circuit back on and you should have a perfect working LED Panel installed!

Need Assistance?