Shop Dixon Graphite Fastening Tool
Shop Dixon's wide range of fastening tools below. We carry everything from safety pins to clamps to help you get the job done, no matter what that it may be.
9/16-in Double-Ear Pinch-On Clamp
1315
The 9/16 Inch Pinch-On Clamp has a clamp capacity of 0.492 - 0.591 in. The Pinch-On Clamp is composed of...
$98.13Case of 100
3/4 Double Ear Pinch-On Clamp
1720
The 3/4 Inch Pinch-On Clamp is composed of a zinc plated steel material.The Pinch-On Clamp has a clamp capacity of...
$98.13Case of 100
3/8-in - 5/8-in Band Clamp Tool
F100
To be used to apply bands, the 3/8 Inch - 5/8 Inch Band Clamp Tool is equipped with a spin...
$422.89Each
King Safety Cables With Hose End
WB1
This safety calve is easy to install and remove with no tools needed, with a highly resistant to rust and...
$13.83Each
1/4" Whipchek Safety Cable End Hose
WA2
This king cables are low cost and designed to eliminae injuries by broken air hose connections. Whipchek safety cables are...
$20.83Each
1/8-in King Safety Cable
WSR1
Conveniently, the 1/8 Inch King Safety Cable is an economic answer to eliminate injuries caused by damaged air hose connections....
$13.91Each
Air King Steel Safety Clips
AC1
To ensure that couplings will not accidentally disconnect, use the Dixon Air King Steel Safety Clips. The safety clip will...
$11.46Case of 25
Make-A-Clamp kit
4001
The Make-A-Clamp kit features bands, splices, and fasteners made of stainless steel that is extremely resistant to corrosion and rust....
$232.45Kit
13/16-in K Series Band Clamp
K3
The 13/16 Inch K Series Band Clamp can be center punched or rolled over. The clamp bands and buckles are...
Info Only
2 5/16-in - 2 5/8-in Double Bolt Hose Clamp
DL32
The 2 5/16 Inch - 2 5/8 Inch Double Bolt Hose Clamp includes dual gripping ridges in its inner surface....
Info Only
1" Malleable Iron Boss Clamps
B14
These sturdy boss clamps are made of malleable iron for single use only, designed to bend as they are tightened....
Discontinued
6 1/2 inch Double Bolt Hose Clamp
769
The Double Bolt Hose Clamp's inner surface has dual gripping ridges. The bold lugs featured on this item are reinforced...
Discontinued
K Series Band Clamp
K10
The K Series Band Clamp is designed for use over the hose before the fitting is inserted. The clamp can...
Discontinued
2-in Malleable Iron Boss Clamp
BU29
The 2 Inch Malleable Iron Boss Clamp is reccomended to be shaped only once. It is suitable for rubber, plastic,...
Discontinued
3/4" Boss Clamp
BU9
The 3/4" Boss Clamp uses two bolts that differ from the standard bolts in their length, diameter, and hardness. The...
Discontinued
K Series Galvanized Steel Band Clamps
K20
The K Series Galvanized Steel Band Clamps can be rolled over or center pucnhed as well. The clamp features an...
Discontinued
All Stainless LSS Series Quick Release Clamp 2 1/16 in Hose O.D
LSS188
The All Stainless LSS Series Quick Release Clamp 2 1/16 in Hose O.D features an effective quick release system. The...
Discontinued
4-in Galvanized Steel K Series Band Clamp
K16
The 4 Inch Galvanized Steel K Series Band Clamp can be center punched or rolled over. It is entirely made...
Discontinued
7/8-in Double Ear Clamp
2023
The 7/8 Inch Double Ear Clamp features a pinch on locking type. The double ear clamp is coated with zinc...
Discontinued
Need Assistance?